Makita GPK01 Instruction Manual page 10

For tool with mini planer blades
NOTE: A pair of planer blades are assembled in
the drum. Repeat the following procedures for each
planer blade.
Removing mini planer blades
1.
Loosen the installation bolts one turn using the
box wrench provided.
Fig.12
► 1 . Installation bolt 2. Box wrench
2. Slide the mini planer blade out of the drum by
pushing one end of the blade outwards from the belt
cover side.
3
4
Fig.13
► 1 . Mini planer blade 2. Drum 3. Belt cover 4.
T-handle of box wrench
NOTE: Use the ends of T-handle of the box wrench to
slide the mini planer blade out for safer operation and
maintenance.
Installing mini planer blades
1. Clean out all the wood chips and foreign matters
adhering to the drum and mini planer blade.
2. Slide a mini planer blade along between the drum
and set plate by pushing one end of the blade inwards
from the side opposite to the belt cover.
3. Cross-tighten all the installation bolts evenly with
the box wrench.
4
2
1
6
5
Fig.14
► 1 . Mini planer blade 2. Drum 3. Set plate 4. Belt
cover 5. Installation bolt 6. Box wrench
Mini planer blade calibration
Perform a calibration on planner blades at regular inter-
1
vals to optimize work efficiency.
2
1. Loosen the installation bolts one turn using the
box wrench provided.
2. Slide the mini planer blade out of the drum by
pushing one end of the blade outwards from the belt
cover side.
3.
Unscrew the installation bolts from the drum using
the box wrench.
4. Disassemble the drum plate and set plate (with
adjusting plate) from the drum.
Fig.15
► 1 . Installation bolt 2. Drum plate 3. Set plate (with
adjusting plate) 4. Drum
10 ENGLISH
3
1
2
1
2
3
4