In order to make an alteration, however, the
part of the program that you wish to alter must
not have been activated yet.
- Program – the program is not affected when
the program knob is operated. Interrupt the
program instead.
- Temperature – can be altered before the
temperature has been reached in the main
wash.
- Spin speed – before the machine enters spin
mode.
- Super rinse – before the machine enters
rinse mode.
8 8
PROGRAM COMPLETED
The program is complete when the door
can be opened with the
you have selected a program without spinning,
and if water remains in the machine, run the
Spin or Drain program to enable the door to be
opened.
9 9
WHEN WASHING IS FINISHED
Turn off the main power switch
close the washer door to prevent small
children from crawling into the machine.
button. If
and