Bosch OBD1100 User Manual page 14

1 4 | Operating instructions | OBD 1100 |
PID PID description
VEH SPEED Vehicle Speed
VGT_A_ACT, Variable Geometry Turbo A
B_ACT Position, Turbo B
VGT_A_CMD, Commanded Variable Geome-
B_CMD try Turbo A Position, Turbo B
VGT_A_STAT, Variable Geometry Turbo A
B_STAT Control Status, Turbo B
VPWR Control Module Voltage
WG_A_ACT, B_ Wastegate A Position, B
ACT Position
WG_A_CMD, Commanded Wastegate A
B_CMD Control, B Control
TQ_DD Driver's demand engine per-
cent torque
TQ_ACT Actual engine percent torque
TQ_MAX1, Engine percent torque at
MAX2, MAX3, idle point 1, 2, 3, 4, 5
MAX4, MAX5
TQ_REF Engine reference torque
VGT_A_ACT Variable geometry turbo A
position
VGT_A_CMD Commanded variable geome-
try turbo A position
VGT_A_STAT Variable geometry turbo A con-
trol status
VGT_B_ACT Variable geometry turbo B
position
VGT_B_CMD Commanded variable geome-
try turbo B position
VGT_B_STAT Variable geometry turbo B con-
trol status
VPWR Control module voltage
WG_A_ACT Wastegate A position
WG_A_CMD Commanded wastegate A
control
WG_B_ACT Wastegate B position
WG_B_CMD Commanded wastegate B
control
574114 REV B | 08.2018 Bosch Automotive Service Solutions
en