2.2 Compact Scaler Switcher Rear Panel
AUDIO INPUT
①
Including 3 HDMI audio & 2 VGA audio inputs
User can choose any one audio (embedded HDMI audio or external input audio) for
HDMI audio input by sending RS232 commands.
AUDIO OUTPUT
②
Audio output port, the audio comes from the input audio corresponding to the
selected video source and mixed with MIC audio.
IR OUT
③
5 in total, connect with IR emitters to control local source devices or Compact
Scaler Switcher from remote, switched along with corresponding video source.
IR IN
④
Connects with IR receiver (with carrier wave only), to receive IR signal send by the
IR remote or remote controller of other input/output device.
FIRMWARE
⑤
USB port, connects with USB flash disk or other storage which is with update file
inside, to update the system firmware.
RS232
⑥
Serial control port, 3-pin captive screw connector, connect with a control device
(such as a computer) to control Compact Scaler Switcher or other devices
connected with HDMI Twisted Pair PoC Receiver.
DC 12V
⑦
Power port, connect with DC 12V power adapter.
MIC
⑧
a) MIC port
Connect with microphone
b) Dial switch
Including 3 levels: 48V phantom power mode (connect with condenser
Compact Scaler Switcher (with PoC)
4