Application; System Operations; Operations Of Front Panel Buttons; Resolution Adjusting - Gentec SC0501 User Manual

3.5 Application

Compact Scaler Switcher has a good application in various occasions, such as
computer realm, monitoring, conference room, big screen displaying, television
education, command & control center and smart home etc.

4. System Operations

4.1 Operations of Front Panel Buttons

Front panel buttons can be used for output resolution adjusting, switching operations,
software updating, volume adjusting and other operations in menus.

4.1.1 Resolution Adjusting

Resolution supports auto-adjusting and manual-adjusting. Press and hold for
RESO/AUTO button for 7 seconds or more to switch between auto-adjusting/ manual-
adjusting mode.
Note:
1. In auto-adjusting mode, Compact Scaler Switcher will choose the resolution of the
display device at the far-end as the preferred resolution.
If you need to choose the resolution of local HDMI display device:
Cut off the power of Compact Scaler Switcher and disconnect Compact Scaler
Switcher and HDMI Twisted Pair PoC Receiver.
Turn on the power of Compact Scaler Switcher.
Gets the resolution of local HDMI output device.
Connect HDMI Twisted Pair PoC Receiver to Compact Scaler Switcher.
2. In auto-switching mode, front panel button control is not available, but IR and RS232
control are able to switch modes.

4.1.2 Switching Operations

Video signals support auto-switching and manual-switching. Press and hold for
SOURCE/AUTO button for 7 seconds or more to enter in auto-switching/ manual-
switching mode.
The display result is showed as below:
IN: HDMI1 MANUAL
1280 X 720
The display result will be showed for 2 seconds.
Compact Scaler Switcher (with PoC)
IN: HDMI1 AUTO
1280 X 720
9