Instructions Of Vga Converting Cable - Gentec SC0501 User Manual

STANDBY on. Only when CEC is on, will it be able to set auto-standby status.
OSD Duration: Includes 5 s, 10 s, 15 s and Off. "s" is for Second.
VERSION: Displays software version

4.6 Instructions of VGA Converting Cable

As VGA source supports YPbPr and C-video source, Compact Scaler Switcher
provides with 2 VGA converting cables to compliant with these signals.
When need to select these signals as input source, please switch to channel INPUT 4
(or INPUT 5), and then set the signal type in OSD. And then switch to other input
channel and connect INPUT 4 (or INPUT 5) with corresponding source device. At last,
please switch to INPUT4 (or INPUT 5) again.
Connect with Component Video (YPbPr) Source
A. Operation Examples:
1. Via front panel buttons & OSD
Press MENU button on front panel to enter in OSD, and then enter in OPTION
setting menu: set "INPUT 4 Select" to YPbPr1, and "INPUT 5 Select" to
YPbPr2. After setting, press SOURCE/AUTO button on front panel to switch to
YPbPr1 or YPbPr2 source.
2. Via RS232 commands
Send command 50681% (or 50684%) to switch to YPbPr1 (or YPbPr2) source.
3. Via IR remote & OSD
Press MENU button on IR remote to enter in OSD, and then enter in OPTION
setting menu: set "INPUT 4 Select" to YPbPr1, and "INPUT 5 Select" to
YPbPr2. After setting, press INPUT 4 (or INPUT 5) button to switch to YPbPr1
(or YPbPr2) source.
B. Connecting the VGA converting cable like this:
Connect with Composite Video (C-VIDEO) Source
A. Operation Examples:
1. Via front panel buttons & OSD
Press MENU button on front panel to enter in OSD, and then enter in OPTION
setting menu: set "INPUT 4 Select" to AV1, and "INPUT 5 Select" to AV2. After
Compact Scaler Switcher (with PoC)
30