•
When copying using the i.LINK connector,
only fi les which are recorded in 1440 CBR
video picture quality can be dubbed. If a DV
input compatible device is connected, fi les
recorded in other picture quality can also be
dubbed. Set the [i.LINK OUTPUT (DUB)] to
[DV]. (
pg. 71)
8 To connect using the AV/S connectors
S Connector
To AC
Outlet
S Cable
(optional)
S Connector
AV Connector
DC Connector
AC Adapter
AV Connector
AV Cable
VCR/DVD
Recorder
Dubbing Operation
1
Set the VCR/DVD recorder to its AUX
input mode.
Check that the images from the camera
have been input correctly to the VCR/DVD
recorder.
2
Start playback on the camera.
•
To play back videos (
•
To play back playlists
1) Press the FUNCTION button.
2) Move the set lever to ¡ / ¢ to select
[PLAYBACK PLAYLIST], then press
down.
3) Move the set lever to ¤. *
4) Move the set lever to ¡ / ¢ to select
[START PLAYBACK], then press down.
(A black screen is displayed for fi ve
seconds at the fi rst and the last
2
scene. *
)
1
*
When dubbing using the i.LINK
connection and with [i.LINK OUTPUT
(DUB)] set to [1440 CBR], a
confi rmation screen is displayed after
operation. Select [OK] and proceed to
step 4).
*
2
When dubbing using the i.LINK
connection and with [i.LINK OUTPUT
(DUB)] set to [1440 CBR], the image
to be dubbed is not displayed on the
camera's screen. Check the images on
the VCR/DVD recorder side.
3
At the point you want to start
dubbing, start recording on the VCR/
DVD recorder.
Refer to the VCR/DVD recorder's
instruction manual.
8 To stop dubbing
Stop recording on the VCR/DVD recorder,
then press the REC button again.
NOTES
•
The date displays cannot be dubbed using
the i.LINK connection.
•
When playing back images dubbed using
the i.LINK on a VCR/DVD recorder, the
images may stop momentarily at junctions
between scenes.
pg. 30)
1
51