Panorama Mode; After Capturing An Image - Nokia N86 User Manual

Select Menu Applications
>
To add location information to all captured
material, select Options
location > On. The location information is
available only for images captured with the main
camera.
It may take several minutes to obtain the
coordinates of your location. The availability and
quality of GPS signals may be affected by your
location, buildings, natural obstacles, and weather
conditions. If you share a file that includes location
information, also the location information is
shared, and your location may be visible to third
parties viewing the file. The device requires
network services to acquire location information.
Location information indicators:
— Location information unavailable. GPS
●
stays on in the background for several minutes.
If a satellite connection is found and the indicator
changes to within that time, all the images
captured and video clips recorded during that
time are tagged based on the received GPS
positioning information.
— Location information is available. Location
●
information is added to the file details.
Files with location information are indicated with
in the Photos application.
> Camera.
Settings Record
> >

Panorama mode

Select Menu Applications
>
Select panorama mode
1. To capture the first image in the panorama,
press the capture key.
2. Slowly turn the device left or right as shown by
the arrows.
A panorama preview is displayed and the
camera captures the image as you turn. The
green arrow indicates that you can slowly
proceed to turn. The red pause mark indicates
that you should stop moving until the green
arrow is displayed again. You can predict when
the next key frame is captured when the red
rectangle moves to the centre of the preview
area.
3. To complete the capture, select Stop. The
panoramic capture stops automatically when
the maximum image width has been reached.
Note that it may take some time for the device
to process the captured image.

After capturing an image

After you capture an image, select from the
following options in the active toolbar (available
only if Show captured image
image camera settings):
> Camera.
from the toolbar.
is enabled in the still
37