Call Divert - Nokia N86 User Manual

Internet call alert — To be alerted for incoming
●
internet calls, select On. If you select Off, you are
not alerted, but you receive a notification if you
missed a call.
Reject call with message
●
message to a caller informing why you could not
answer the call, select Yes.
Message text — Write a text to be sent in a text
●
message when you reject a call.
Image in video call — If video is not sent during
●
a video call, you can select a still image to be
displayed instead.
Automatic redial — Select On, and your device
●
makes a maximum of 10 attempts to connect the
call after an unsuccessful call attempt. To stop
automatic redialling, press the end key.
Show call duration
●
you want the length of a call to be displayed
during the call.
Summary after call
●
you want the length of a call to be displayed after
the call.
Speed dial — Select On, and the numbers
●
assigned to the number keys (2 to 9) can be
dialled by pressing and holding the key.
Speed dial a phone number ", p. 125.
Anykey answer — Select On, and you can
●
answer an incoming call by briefly pressing any
keypad key, except the power key, selection keys,
zoom/volume key, or capture key.
— To send a text
— Activate this setting if
— Activate this setting if
See "
Line in use — This setting (network service) is
●
shown only if the SIM card supports two
subscriber numbers, that is, two phone lines.
Select which phone line you want to use for
making calls and sending text messages. Calls on
both lines can be answered irrespective of the
selected line. If you select
subscribed to this network service, you are not
able to make calls. When line 2 is selected,
shown in the standby mode.
Line change — To prevent line selection
●
(network service), select
your SIM card. To change this setting, you need
the PIN2 code.

Call divert

Select Menu Tools
> >
Call divert.
Call divert allows you to divert incoming calls to
your voice mailbox or another phone number. For
details, contact your service provider.
To activate call divert, select Activate. To check
whether the option is active, select
Several diverting options can be active at the same
time. When all calls are diverted,
the standby mode.
Line 2 and have not
is
Disable if supported by
Settings and Phone
>
Check status.
is shown in
161