Samsung HG43AU800E Install Manual page 21

④
LAN IN / LAN OUT
To connect a LAN cable, use a CAT 7 (*STP type) cable for the connection. (100/10 Mbps)
* Shielded Twisted Pair
⑤
HDMI IN 1, 2 (eARC), 3
Connects to the HDMI jack of a device with an HDMI output.
– No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
– It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet
the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version,
contact to the Samsung customer care centre.
⑥
SERVICE
Connect this port to the port on the optional RJP (Remote Jack Pack). This will allow you to connect external
devices (Camcorder, PC, DVD players etc.) easily.
⑦
DATA
– Used to support data communication between the TV and the SBB or STB.
– Connects using RJ-12 TV type plugs.
⑧
ANT IN (SATELLITE), (Aerial/CABLE)
To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
⑨
DIGITAL AUDIO OUT (OPTICAL)
Connects to a Digital Audio component.
⑩
COMMON INTERFACE
Watches paid channels by inserting your TV viewing card ("CI or CI+ Card") into the COMMON INTERFACE slot.
English - 21