Setting Up Your Printer With Windows 2000 - Kodak PPM200 User Manual

5
Click Next
The KODAK PPM200
Note: Prior to installing the
choose other options such as Learn, Registering online or
Browse (KODAK Web Site, Technical Support or Personal
Picture Maker Supplies).
6
Choose from the following install options:
–
Personal Picture Maker Driver
–
KODAK Picture Page Software
–
Install All Software
Note: You must choose
Install All Software
7
Follow the on-screen instructions.
8
If the KODAK PPM200
Type the letter of your CD-ROM drive followed by
click OK.
Congratulations!
You have successfully set up your printer for Windows Me.

Setting up your printer with Windows 2000

Before you begin:
•
Prepare your printer for printing. For help, see page 1.
•
Make sure you have a USB cable.
•
Make sure Windows 2000 is running.
1
Connect the USB cable to the computer and the printer. For help,
see page 6.
The Microsoft Windows software appears on your computer to
detect new hardware.
or Finish on any subsequent screens.
software installation screen appears.
Personal Picture Maker Driver
screen does not appear, click Start, Run.
9
KODAK PPM200
to enable PC printing.
software, you can
or
:\setup and then