Dual 1 input to 6 outputs 3g/hd/sd-sdi digital video distributor with frontal optical inputs and outputs with optional pluggable sfp modules (30 pages)
Page 3
When the module incorporates any optional SFP/SFP+ optic fiber transmitter provided by Albalá Ingenieros, the HVD3001C02 is a CLASS 1 LASER product as per the IEC 60825-1 standard. Please read the safety instructions included in this manual carefully before using this module.
SNMP management and the ability to record events in a file including date and time information for further analysis. The HVD3001C02 is a TL3000 terminal line module and can be housed in a three rack unit (3 RU) UR3000 mounting frame or a 1 RU UR3100 mounting frame.
Page 8
Albalá Ingenieros | Manual HVD3001C02 and capability for optical inputs and outputs via optional, front panel SFP modules. One electrical output is protected with a bypass relay. • HVD3001C03: A dual 3G/HD/SD-SDI signal distributor with one input and four outputs and capability for optical inputs and outputs via optional, front panel SFP modules.
• Module control and supervision can be done remotely when the mounting frame is equipped with a communications controller module. • One UR3000 mounting frame can house up to 12 HVD3001C02 modules. If power supply redundancy is required and FA3000 or FA3001 modules are used then only 10 modules can be housed in the mounting frame.
Albalá Ingenieros | Manual HVD3001C02 2. SPECIFICATIONS SD/HD/3G-SDI digital video signal input Connector Impedance 75 Ω ± 1 % Return loss: Up to 3 GHz >10 dB Up to 1.5 GHz >15 dB Input Return loss when bypass is active: Up to 3 GHz >10 dB...
Page 12
Albalá Ingenieros | Manual HVD3001C02 SD/HD/3G-SDI digital video optical signal output Connector LC/PC with monomode fiber Number of outputs 1 per section SD/HD/3G-SDI digital video signal Signal formats According to SMPTE ST 424, SMPTE ST 292-1, SMPTE ST 259 standards Bit rates 270 Mbit/s, 1.483 Gbit/s,...
3.2. Safety instructions When the module incorporates any optional SFP/SFP+ optic fiber transmitter provided by Albalá Ingenieros, the HVD3001C02 is a CLASS 1 LASER product as per the IEC 60825-1 standard. Please read the safety instructions included in this manual carefully before using this module.
This symbol indicates that this equipment must be deposited at a collection point for proper waste treatment once it has reached the end of its useful life. 3.4. Power considerations The UR3000 and UR3100 mounting frames can house as many HVD3001C02 modules as will fit in them.
4 - Attach the rear board to the mounting frame with two M3 metric screws and tighten. 5 - Insert the HVD3001P01 board (main board of the HVD3001C02 module) into the front of the mounting frame. The edges of the card slide into two plastic guides inside the mounting frame.
Page 16
Albalá Ingenieros | Manual HVD3001C02 Details for installation of the module in 3 RU mounting frames Details for installation of the module in 1 RU mounting frames...
The following figure shows the HVD3001C02 module rear board connector layout. Rear view of the HVD3001C02 The HVD3001C02 module includes two inputs (IN A, IN B) and six outputs per section (OUT0-A to OUT5-A, OUT0-B to OUT5-B) for 3G/HD/SD-SDI digital video. When configured as a single channel one input, 12 output distributor only input IN A is used.
All coaxial cable used must be Belden 1694A or similar. This type provides the greatest lengths because it is used to calculate the equalizers in the HVD3001C02. Cables carrying signal between the module and the devices should use single piece construction, avoiding spliced sections with double BNC female or barrel connectors.
Albalá Ingenieros | Manual HVD3001C02 4. OPERATION This section describes the significance of the front panel indicators of the HVD3001C02 module and their remote control and monitoring ability. 4.1. Front panel description The appearance of the front panel and the elements it contains are shown in the following illustration.
(regardless of whether the input is electrical or optical) and the Section B indicator LEDs remain off. If the optional electrical-to-optical SFP converter is installed the two optical outputs carry the signal from Input A in optical format. The HVD3001C02 comes from the factory programmed as a dual 2x6 distributor.
Albalá Ingenieros | Manual HVD3001C02 4.3. Module remote control and supervision The HVD3001C02 can optionally be remotely controlled/supervised. In order to perform remote configuration and supervision of the module an optional TL3000 family remote communications controller must be installed in the mounting frame.
- Selection of the electrical input or the optical input. 4.3.1. Details of the HVD3001C02 registers The HVD3001C02 module provides control and status registers that can be read and written by means of specific commands described in the communication control module user manuals.
Page 23
Albalá Ingenieros | Manual HVD3001C02 NO_OPTIC_A 0x01 0x20 Optical input signal status (Section A) 0=OK,1=Fail NO_SIG_B 0x02 0x01 Input signal status (Section B) 0=OK,1=Fail UNLOCK_B 0x02 0x02 Indicates signal unlock fail (Section B) 0=OK,1=Fail L_FAIL_B 0x02 0x04 Indicates a fail in laser (Section B)
Albalá Ingenieros | Manual HVD3001C02 5. GLOSSARY 3G/HD/SD-SDI 3G/HD/SD - Serial Digital Interface for high definition or standard definition digital television capable of transmitting bitrates of 2.970 Gbit/s, 2.967 Gbit/s, 1.485 Gbit/s, 1.483 Gbit/s and 270 Mbit/s. DVB-ASI Asynchronous Serial Interface. An asynchronous serial interface for DVB streams that is one of the principal formats for transmission of MPEG-2 streams over cable.
Albalá Ingenieros | Manual HVD3001C02 6. REGULATIONS IEC 60825-1 (2008) Safety of laser products, Part 1: Equipment classification, requirements and user's guide. SMPTE ST 259 (2008) SDTV Digital Signal/Data Serial Digital Interface. See also: ITU-R BT.656-5 SMPTE ST 292-1 (2011) 1.5 Gb/s Signal/Data Serial Interface.
Need help?
Do you have a question about the HVD3001C02 and is the answer not in the manual?
Questions and answers