Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Albalá Ingenieros, S.A. HVD3001C03
Summary of Contents for Albalá Ingenieros, S.A. HVD3001C03
- Page 1 HVD3001C03 DUAL 1 INPUT TO 4 OUTPUTS 3G/HD/SD-SDI DIGITAL VIDEO DISTRIBUTOR WITH REAR OPTICAL INPUTS AND OUTPUTS WITH OPTIONAL PLUGGABLE SFP MODULES Version 1.0 Albalá Ingenieros, S.A. 20 May 2015 - © Albalá Ingenieros S.A. - All rights reserved Medea, 4 - 28037 Madrid - Spain...
- Page 2 HVD3001C03...
- Page 3 When the module incorporates any optional SFP optic fiber transmitter provided by Albalá Ingenieros, the HVD3001C03 is a CLASS 1 LASER product as per the IEC 60825-1 standard. Please read the safety instructions included in this manual carefully before using this module.
- Page 4 HVD3001C03...
-
Page 5: Table Of Contents
4. OPERATION ........................19 4.1. Front panel description ......................19 4.2. Configuration ..........................20 4.3. Module remote control and supervision ................21 4.3.1. Details of the HVD3001C03 registers ................22 5. GLOSSARY ........................25 6. REGULATIONS ........................27 7. VERSIONS ......................... 29... - Page 6 HVD3001C03...
-
Page 7: Description
SNMP management and the ability to record events in a file including date and time information for further analysis. The HVD3001C03 is a member of the TL3000 line terminal family but can only be installed in (3 RU) UR3000 mounting frames. - Page 8 Albalá Ingenieros | Manual HVD3001C03 and capability for optical inputs and outputs via optional, front panel SFP modules. • HVD3001C04: A dual 3G/HD/SD-SDI signal distributor with one input and four outputs and capability for optical inputs and outputs via optional, front panel SFP modules. One electrical output is protected with a bypass relay.
-
Page 9: Features
• Module control and supervision can be done remotely when the mounting frame is equipped with a communications controller module. • One UR3000 mounting frame can house up to 12 HVD3001C03 modules. If power supply redundancy is required and FA3000 or FA3001 modules are used then only 10 modules can be housed in the mounting frame. -
Page 10: Block Diagram
Albalá Ingenieros | Manual HVD3001C03 1.3. Block diagram... -
Page 11: Specifications
Albalá Ingenieros | Manual HVD3001C03 2. SPECIFICATIONS SD/HD/3G-SDI digital video signal input Connector Impedance 75 Ω ± 1 % Return loss: Up to 3 GHz >10 dB Up to 1.5 GHz >15 dB Number of inputs 1 per section, 2 sections... - Page 12 Albalá Ingenieros | Manual HVD3001C03 Accepted formats 625i50, 525i59.94, 720p50, 720p59.94, 1080i50, 1080i59.94, 1080p50, 1080p59.94 Input to output delay: 270 Mbit/s 7 ns ± 1 ns 1.5 Gbit/s 4 ns ± 1 ns 3 Gbit/s 4 ns ± 1 ns...
-
Page 13: Installation
3.2. Safety instructions When the module incorporates any optional SFP optic fiber transmitter provided by Albalá Ingenieros, the HVD3001C03 is a CLASS 1 LASER product as per the IEC 60825-1 standard. Please read the safety instructions included in this manual carefully before using this module. -
Page 14: Environmental Considerations
This symbol indicates that this equipment must be deposited at a collection point for proper waste treatment once it has reached the end of its useful life. 3.4. Power considerations The UR3000 and UR3100 mounting frames can house as many HVD3001C03 modules as will fit in them. -
Page 15: Installation Of Sfp Modules
4 - Attach the rear board to the mounting frame with two M3 metric screws and tighten. 5 - Insert the HVD3001P02 board (main board of the HVD3001C03 module) into the front of the mounting frame. The edges of the card slide into two plastic guides inside the mounting frame. - Page 16 Albalá Ingenieros | Manual HVD3001C03 Details for installation of the module in 3 RU mounting frames Details for installation of the module in 1 RU mounting frames...
-
Page 17: Interconnection
The following figure shows the HVD3001C03 module rear board connector layout. Rear view of the HVD3001C03 The HVD3001C03 module includes two inputs (IN A, IN B) and four outputs per section (OUT0-A to OUT3-A, OUT0-B to OUT3-B) for 3G/HD/SD-SDI digital video. When configured as a single channel one input, eight output distributor only input IN A is used. -
Page 18: Optical Sdi Video Connections
All coaxial cable used must be Belden 1694A or similar. This type provides the greatest lengths because it is used to calculate the equalizers in the HVD3001C03. Cables carrying signal between the module and the devices should use single piece construction, avoiding spliced sections with double BNC female or barrel connectors. -
Page 19: Operation
Albalá Ingenieros | Manual HVD3001C03 4. OPERATION This section describes the significance of the front panel indicators of the HVD3001C03 module and their remote control and monitoring ability. 4.1. Front panel description The appearance of the front panel and the elements it contains are shown in the following illustration. -
Page 20: Configuration
(regardless of whether the input is electrical or optical) and the Section B indicator LEDs remain off. If the optional electrical-to-optical SFP converter is installed the two optical outputs carry the signal from Input A in optical format. The HVD3001C03 comes from the factory programmed as a dual 2x4 distributor. -
Page 21: Module Remote Control And Supervision
Albalá Ingenieros | Manual HVD3001C03 4.3. Module remote control and supervision The HVD3001C03 can optionally be remotely controlled/supervised. In order to perform remote configuration and supervision of the module an optional TL3000 family remote communications controller must be installed in the mounting frame. -
Page 22: Details Of The Hvd3001C03 Registers
- Selection of the electrical input or the optical input. 4.3.1. Details of the HVD3001C03 registers The HVD3001C03 module provides control and status registers that can be read and written by means of specific commands described in the communication control module user manuals. - Page 23 Albalá Ingenieros | Manual HVD3001C03 NO_OPTIC_A 0x01 0x20 Optical input signal status (Section A) 0=OK,1=Fail NO_SIG_B 0x02 0x01 Input signal status (Section B) 0=OK,1=Fail UNLOCK_B 0x02 0x02 Indicates signal unlock fail (Section B) 0=OK,1=Fail L_FAIL_B 0x02 0x04 Indicates a fail in laser (Section B)
- Page 24 Albalá Ingenieros | Manual HVD3001C03 HVD3001C03...
-
Page 25: Glossary
Albalá Ingenieros | Manual HVD3001C03 5. GLOSSARY 3G/HD/SD-SDI 3G/HD/SD - Serial Digital Interface for high definition or standard definition digital television capable of transmitting bitrates of 2.970 Gbit/s, 2.967 Gbit/s, 1.485 Gbit/s, 1.483 Gbit/s and 270 Mbit/s. DVB-ASI Asynchronous Serial Interface. An asynchronous serial interface for DVB streams that is one of the principal formats for transmission of MPEG-2 streams over cable. - Page 26 Albalá Ingenieros | Manual HVD3001C03 HVD3001C03...
-
Page 27: Regulations
Albalá Ingenieros | Manual HVD3001C03 6. REGULATIONS IEC 60825-1 (2008) Safety of laser products, Part 1: Equipment classification, requirements and user's guide. SMPTE ST 259 (2008) SDTV Digital Signal/Data Serial Digital Interface. See also: ITU-R BT.656-5 SMPTE ST 292-1 (2011) 1.5 Gb/s Signal/Data Serial Interface. - Page 28 Albalá Ingenieros | Manual HVD3001C03 HVD3001C03...
-
Page 29: Versions
Albalá Ingenieros | Manual HVD3001C03 7. VERSIONS Ver. Date Description 13-06-2013 Preliminary Version 20-05-2015 First version... - Page 30 Albalá Ingenieros, S.A. Medea, 4 - 28037 Madrid Spain +34 913274453 www.albalaing.com info@albalaing.com...
Need help?
Do you have a question about the HVD3001C03 and is the answer not in the manual?
Questions and answers