Page 1
FULL MANUAL HW-Q600B Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register...
Page 2
PERSONNEL. CAUTION Refer to the table below for an explanation of symbols which may be on your Samsung product. • Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
Page 3
Radiation Exposure Statement 10. Protect the power cord from being walked This equipment complies with IC RSS-102 on or pinched particularly at plugs, radiation exposure limits set forth for an convenience receptacles, and the point uncontrolled environment. This equipment should where they exit from the apparatus.
Page 4
PRECAUTIONS 5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery 1. Ensure that the AC power supply in your in the general household trash. Do not house complies with the power expose the battery to excess heat, direct requirements listed on the identification sunlight, or fire.
Adjusting the Soundbar volume with a TV remote control ------------------------- Connecting the Soundbar Connecting Electrical Power ------------------------- Connecting the Samsung Wireless Rear Kit to your Soundbar ------------------------- Using a wired connection to the TV Method 1. Connecting with HDMI ------------------------- Method 2.
Page 6
Connecting a USB drive Connecting a Mobile Device Connecting via Bluetooth ------------------------- Using Tap Sound ------------------------- Installing the Wall Mount Installation Precautions ------------------------- Wallmount Components ------------------------- Installing the Soundbar in front of TV Software Update USB Update ------------------------- Reset ------------------------- Troubleshooting License Open Source License Notice...
• For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit) • To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.
02 PRODUCT OVERVIEW Front Panel / Top Panel of the Soundbar Top Panel Display Displays the product’s status and current mode. (Power) Button Turns the power on and off. • Auto Power Down Function The unit turns off automatically in the following situations: –...
• When you turn on this unit, there will be a 4 to 5 second delay before it produces sound. • If you hear sounds from both the TV and Soundbar, go to the Settings menu for the TV audio and change the TV speaker to External Speaker.
03 USING THE REMOTE CONTROL Inserting Batteries before using the Remote Control (AAA batteries X 2) Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries (1.5V) oriented so that their polarity is correct.
Page 11
WOOFER By pressing the button, you can adjust the volume of the each speaker. TONE SOUND CH LEVEL • Press the button to select CENTER LEVEL or TOP LEVEL and then adjust the volume CONTROL MODE between -6~+6 by using the Up/Down buttons. CH LEVEL •...
Page 12
Press the indicated areas to select Up/Down/Left/Right. Up/Down/ PAIR Left/Right Press Up/Down/Left/Right on the button to select or set functions. SOUND MODE • Repeat To use the Repeat function in “USB” mode, press the Up button. • Music Skip WOOFER Press the Right button to select the next music file.
Page 13
SOUND MODE WOOFER SOUND WOOFER MODE TONE CH LEVEL CONTROL (BASS) LEVEL Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the woofer (bass) volume level to 0 (Default), press the button. WOOFER By pressing the button, you can adjust the volume of the treble or bass sound.
3.1.2 ch 5.1.2 ch • The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the vendor you purchased the Soundbar from. • When the input source is Dolby Atmos®, DTS:X, the Subwoofer-only setup provides 3.1.2 channel audio, while the Subwoofer &...
• Set the TV speaker to External Speaker to use this function. • Manufacturers supporting this function: Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.
04 CONNECTING THE SOUNDBAR Connecting Electrical Power Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order: • For more information about the required electrical power and power consumption, refer to the label attached to the product.
Page 17
• The Soundbar will automatically power on when ID SET is complete. ID SET SAMSUNG logo is on the top 5 Sec 3. Check if the LINK LED is solid blue (connection complete). The LINK LED indicator stops blinking and...
Page 18
Red and blue See the contact information Blinking Malfunction for the Samsung Service Center in this manual. NOTES • Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.
Wireless Receiver Module (sold separately) is clear of any obstructions. Connecting the Samsung Wireless Rear Kit to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9100S, SWA-9200S sold separately) to your Soundbar.
05 USING A WIRED CONNECTION TO THE TV Method 1. Connecting with HDMI Connecting the TV that supports HDMI ARC/eARC (Audio Return Channel/ Enhanced Audio Return Channel) CAUTION • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. •...
Page 21
• To connect with eARC, the eARC function in the TV menu should be set to On. Refer to the TV user manual for details on setting. (e.g. Samsung TV : Home ( ) → Menu → Settings ( ) →...
Method 2. Connecting using an Optical Cable Pre-connection Checklist • When both the HDMI cable and optical cable are connected, the HDMI signal is received first. • When you use an optical cable and the terminals have covers, be sure to remove the covers. Bottom of the Soundbar Optical Cable (not supplied)
Page 23
Using the Q-Symphony Function For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for optimum surround effect. When the Soundbar is connected, the menu, “TV+Soundbar” appears under the Sound Output menu of the TV. Select the corresponding menu.
• After you have connected the Soundbar to your TV the first time, use the “BT READY” mode to reconnect. If the device fails to connect • If a previously connected Soundbar listing (e.g. “[AV] Samsung Soundbar Q6B-Series”) appears in the list, delete it. • Then repeat steps 1 through 3.
Page 25
Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but “BT”. • Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.) •...
07 CONNECTING AN EXTERNAL DEVICE Method 1. Connecting using an HDMI Cable (Capable of Dolby Atmos® decoding and playback) Pre-connection Checklist • If the Audio Output options include Secondary Audio, make sure Secondary Audio is set to Off. • Make sure that the content supports Dolby Atmos®. •...
Open the audio output options on the settings menu of your BD player or other device and make sure that “No Encoding” is selected for Bitstream. For example, on a Samsung BD Player, go to Home Menu → Sound → Digital Output and then select Bitstream (unprocessed).
Page 28
08 CONNECTING A USB DRIVE You can play music files located on USB drive through the Soundbar. USB port HDMI USB (5V 0.5A) HDMI TO TV (eARC/ARC) DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) 1. Connect the USB drive to the USB port on the bottom of the product. 2.
Page 29
Soundbar for more than 5 seconds to display “BT PAIRING”. 2. On your device, select “[AV] Samsung Soundbar Q6B-Series” from the list that appears. • When the Soundbar is connected to the Mobile device, [Mobile Device Name] → “BT” appears in the front display.
Page 30
If the device fails to connect • If you have an existing Soundbar (e.g., “[AV] Samsung Soundbar Q6B-Series”) on the list of speakers on the Mobile device, delete it. • Then repeat steps 1 and 2. What is the difference between BT READY and BT PAIRING? •...
Page 31
• A Bluetooth device may experience noise or malfunction under in the following conditions: – When the body is in contact with the signal transceiver on the Bluetooth device or Soundbar – In corners or when there is an obstacle in proximity, such as a wall or partition, where electrical changes may occur.
Page 32
(A device that is not currently playing will be disconnected.) • Only one Samsung TV, or 2 Bluetooth devices can be connected at the same time. • The Soundbar will be disconnected from Bluetooth devices when it receives a connection request from a Samsung TV.
Tap the Soundbar with your mobile device to play audio from the mobile device through the Soundbar. • This function may not be supported, depending on the mobile device. • This function is only compatible with Samsung mobile devices with Android 8.1 or later. SmartThings App Top of the Soundbar TAP ...
10 INSTALLING THE Wallmount Components WALL MOUNT Wall Mount Guide Installation Precautions • Install on a vertical wall only. (M4 x L10) • Do not install in a place with high Holder-Screw Screw temperature or humidity. • Verify whether the wall is strong enough to support the product’s weight.
Page 35
2. Align the Wall Mount Guide’s Center Line 5. Push a screw (not supplied) through each with the center of your TV (if you are Holder-Screw, and then screw each screw mounting the Soundbar below your TV), and firmly into a support screw hole. then fix the Wall Mount Guide to the wall using tape.
11 INSTALLING THE 7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the SOUNDBAR IN Bracket-Wall Mounts on the Holder-Screws on the wall. FRONT OF TV Wall Place the Soundbar on a TV stand. 8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws.
UPDATE USB port on the Soundbar. 5. Turn on the Soundbar and press the (Source) button to select USB source. Samsung may offer updates for the Soundbar’s “UPDATE” will be displayed, this may take up system firmware in the future. to 3 minutes. USB port UPDATE ...
Reset Top of the Soundbar INIT OK With the Soundbar on, press the (Volume) buttons on the body at the same time for at least 5 seconds. “INIT OK” appears on the display and then the Soundbar is reset. CAUTION •...
) → All Settings ( ; HDMI-CEC may not be activated on the TV. → Sound → Sound Output → Select Turn on the CEC on the TV menu. (Samsung TV: Home ( ) → Menu → Settings ( ) →...
Page 40
Change the TV’s audio output to if they are located too close to the PCM or Dolby Digital. Soundbar. e. g. microwaves, wireless (For a Samsung TV: Home ( ) → Menu → routers, etc. Settings ( ) → All Settings ( ) →...
The Bluetooth® word mark and logos are ENERGY STAR qualified model only (The other registered trademarks owned by Bluetooth SIG, models) Inc. and any use of such marks by Samsung – As an ENERGY STAR Partner, Samsung has Electronics Co., Ltd. is under license. Other determined that this product or product...
15 OPEN SOURCE LICENSE NOTICE To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com) 16 IMPORTANT NOTES ABOUT SERVICE Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Dimensions (W x H x D) (184.0 x 343.0 x 295.0 mm) AMPLIFIER 160W Rated Output power NOTES • Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. • Weight and dimensions are approximate. ENG - 43...
Page 44
SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG) LABOR...
Page 46
MANUEL COMPLET HW-Q600B Imaginez les possibilités Merci d’avoir choisi un appareil Samsung. Pour recevoir une assistance plus complète, veuillez enregistrer votre produit sur www.samsung.com/register...
Page 47
Reportez-vous au tableau ci-dessous pour MISE EN GARDE comprendre les symboles pouvant figurer sur votre produit Samsung. • Veillez à éviter toute projection sur l’appareil. Ne placez jamais de récipients contenant un liquide (ex. : vase) dessus.
Page 48
Declaration d’exposition aux radiations: 10. Placez le cordon d’alimentation de sorte qu’il Cet equipement est conforme aux limites ne puisse être ni piétiné ni pincé, d’exposition aux rayonnements IC RSS-102 particulièrement au niveau de la fiche, de la etablies pour un environnement non controle. prise de courant et du point de sortie de Cet equipement doit etre installe et utilise avec l’appareil.
Page 49
PRÉCAUTIONS 5. Les piles utilisées dans ce produit peuvent contenir des produits chimiques dangereux pour l’environnement. Ne jetez pas les piles 1. Assurez-vous que le bloc d’alimentation CA dans votre poubelle habituelle. Ne vous chez vous est conforme aux exigences de débarrassez pas des piles en les faisant puissance figurant sur la plaque brûler.
Page 50
Réglage du volume du Soundbar avec une télécommande du téléviseur ------------------------- Branchement du Soundbar Branchement de l’alimentation ------------------------- Connexion du kit haut-parleur arrière sans fil Samsung à votre Soundbar ------------------------- Utilisation d’une connexion filaire au Téléviseur Méthode 1. Connexion avec un câble HDMI ------------------------- Méthode 2. Branchement à l’aide d’un câble optique ------------------------- Utilisation d’une connexion sans fil avec le...
Page 51
Branchement d’un lecteur USB Branchement d’un Appareil Mobile Connexion par Bluetooth ------------------------- Utilisation de la fonction Tap Sound ------------------------- Installation du Support Mural Précautions d’installation ------------------------- Composantes murales ------------------------- Installation du soundbar devant le Téléviseur Mise à jour Logicielle Mise à jour USB ------------------------- Réinitialisation ------------------------- Dépannage Licence...
Soundbar) • Pour acheter des composants supplémentaires ou des câbles en option, veuillez contacter un centre de service Samsung ou le service clientèle Samsung. • Pour plus d’informations sur le support mural, consultez la page 34. • La conception et les spécifications sont susceptibles d’être modifiées sans préavis.
02 PRÉSENTATION DU PRODUIT Panneau avant/Panneau supérieur du Soundbar Panneau supérieur Affichage Affiche le statut et le mode actuel du produit. Bouton (Alimentation) Permet d'allumer et d'éteindre l'appareil. • Fonction Auto Power Down L’unité se met automatiquement hors tension dans les situations suivantes: – Mode D.IN / HDMI / BT / USB: si, pendant 18 minutes, aucun signal audio n’est émis. Bouton (volume) Permet de régler le volume.
• Lorsque vous mettez cet appareil sous tension, un délai de 4 à 5 secondes précède l’émission du son. • Si le son provient à la fois du téléviseur et du Soundbar, accédez au menu Paramètres correspondant au son du téléviseur et réglez le haut-parleur du téléviseur à Haut-p. externe. HDMI Partie inférieure du panneau du Soundbar USB (5V 0.5A)
03 UTLISATION DE LA TÉLÉCOMMANDE Insertion des piles avant d’utiliser la télécommande (2 piles AAA) Faites glisser le panneau arrière dans le sens de la flèche jusqu’à ce qu’il soit complètement retiré. Insérez 2 piles AAA (1,5V) dans le bon sens (polarité correcte). Refaites glisser le panneau arrière dans sa position initiale.
Page 56
WOOFER En appuyant sur le bouton, vous pouvez ajuster le volume de chaque haut-parleur. TONE SOUND CH LEVEL • Appuyez sur le bouton CENTER LEVEL ou TOP LEVEL, puis réglez le volume entre -6 et CONTROL MODE +6 à l’aide des boutons Haut/Bas. CH LEVEL •...
Page 57
Appuyez sur les zones indiquées pour sélectionner le bouton du Haut/Bas/Gauche/Droite. Haut/Bas/ PAIR Gauche/ Appuyez sur le bouton du Haut/Bas/Gauche/Droite pour sélectionner ou définir des Droite SOUND MODE fonctions. • Répéter Pour utiliser la fonction Répéter en mode «USB», appuyez sur le bouton du Haut. •...
Page 58
SOUND MODE WOOFER NIVEAU du TONE CH LEVEL SOUND CONTROL WOOFER MODE (BASSES) Faites basculer ce bouton vers le haut ou vers le bas pour régler le niveau du haut-parleur (basses) sur -12 ou entre -6 et +6. Pour régler le niveau de volume du haut-parleur (basses) sur 0 (par défaut), appuyez sur ce bouton.
3.1.2 canaux 5.1.2 canaux • Le haut-parleur arrière sans fil Samsung peut être acheté séparément. Pour vous en procurer un, contactez le fournisseur auprès duquel vous avez acheté le Soundbar. • Lorsque la source d’entrée est Dolby Atmos®, DTS:X, la configuration Caisson des basses uniquement fournit le son du canal 3.1.2, tandis que la configuration Caisson des basses et haut-...
• Réglez le haut-parleur du téléviseur sur Haut-p. externe pour utiliser cette fonction. • Fabricants qui utilisent cette fonction : Samsung, VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA 1. Éteignez le Soundbar. 2. Appuyez sur le bouton WOOFER et maintenez-le enfoncé pendant 5 secondes.
04 BRANCHEMENT DU SOUNDBAR Branchement de l’alimentation Utilisez les composants d’alimentation afin de brancher le caisson de basses et le Soundbar dans une prise électrique dans l’ordre suivant : • Pour obtenir de l’information sur la source d’ a limentation et la consommation électrique, veuillez vous reporter à...
Page 62
5 secondes. • Le message ID SET apparaît sur l’écran du Soundbar pendant un moment, puis disparaît. • Le Soundbar est mis sous tension automatiquement lorsque ID SET est terminé. Le logo SAMSUNG est situé sur le ID SET dessus. 5 Sec 3.
Page 63
Rouge et bleu Recherchez les coordonnées du Clignotant Dysfonctionnement Centre de service Samsung dans le manuel. REMARQUES • Ne branchez pas le cordon d’alimentation de ce produit ou de votre téléviseur à une prise murale tant que tous les composants ne sont pas connectés.
Soundbar Passez à un véritable son ambiophonique sans fil en connectant le haut-parleur arrière sans fil Samsung (SWA-9100S ou SWA-9200S, vendu séparément) à votre Soundbar. Pour plus d’informations sur les connexions, veuillez consulter le manuel d’utilisation du haut-parleur arrière sans fil Samsung.
05 UTILISATION D’UNE CONNEXION FILAIRE AU TÉLÉVISEUR Méthode 1. Connexion avec un câble HDMI Connexion du téléviseur prenant en charge HDMI ARC/eARC (canal de retour audio/canal de retour audio amélioré) MISE EN GARDE • Lorsque le câble HDMI et le câble optique sont tous les deux connectés, le signal HDMI est reçu en premier. • Pour connecter le câble HDMI entre le téléviseur et le Soundbar, assurez-vous de connecter les bornes marquées ARC ou eARC.
Page 66
• Pour la connexion à eARC, la fonction eARC dans le menu du téléviseur devrait être activée. Reportez-vous au manuel de l’utilisateur du téléviseur pour de plus amples renseignements sur ce réglage. (Par exemple, Téléviseur Samsung : Accueil ( ) → Menu → Paramètres ( ) →...
Méthode 2. Branchement à l’aide d’un câble optique Liste de contrôle de pré-connexion • Lorsque le câble HDMI et le câble optique sont tous les deux connectés, le signal HDMI est reçu en premier. • Lorsque vous utilisez un câble optique et que les bornes ont leurs caches, assurez-vous de retirer les caches.
Page 68
Utilisation de la fonction Q-Symphony Pour utiliser la fonction Q-Symphony, le Soundbar se synchronise avec un téléviseur Samsung afin de restituer le son via deux appareils pour un effet ambiophonique optimal. Lorsque le Soundbar est connecté, le menu «TV+Soundbar» apparaît au-dessous du menu Sortie audio du téléviseur.
2. Sélectionnez le mode Bluetooth sur le téléviseur. (Pour plus d’informations, reportez-vous au manuel du téléviseur.) 3. Sélectionnez «[AV] Samsung Soundbar Q6B-Series» dans la liste affichée sur l’écran du téléviseur. Lorsqu’un Soundbar est disponible, il a le statut «Need Pairing» ou «Paired» dans la liste des périphériques Bluetooth du téléviseur.
Page 70
Déconnexion du Soundbar du téléviseur Appuyez sur le bouton (Source) du panneau supérieur ou de la télécommande, puis sélectionnez n’importe quel mode sauf «BT». • La déconnexion prend du temps car le téléviseur doit recevoir une réponse du Soundbar. (Le temps requis peut différer en fonction du modèle du téléviseur.) •...
07 BRANCHEMENT D’UN PÉRIPHÉRIQUE EXTERNE Méthode 1. Branchement à l’aide d’un câble HDMI (décodage et lecture Dolby Atmos® possible) Liste de contrôle de pré-connexion • Si les options de sortie audio incluent une sortie audio secondaire, vérifiez qu’elle est désactivée. • Vérifiez que le contenu prend en charge le Dolby Atmos®. •...
«Aucun encodage» est sélectionné pour le Bitstream. Par exemple, sur un lecteur Blu-ray Samsung, accédez à Menu Accueil → Son → Sortie numérique et sélectionnez Bitstream (non traité). • Avec l’interconnexion HDMI, le Soundbar joue le son de la source dans ses propres haut-parleurs et envoie le signal vidéo tel quel vers un téléviseur par le second câble HDMI.
08 BRANCHEMENT D’UN LECTEUR USB Vous pouvez écouter les fichiers musicaux qui sont enregistrés sur le lecteur USB au moyen du Soundbar. Port USB HDMI USB (5V 0.5A) HDMI TO TV (eARC/ARC) DC 24V DIGITAL AUDIO IN (OPTICAL) USB (5V 0.5A) 1.
Soundbar et maintenez-le enfoncé pendant plus de 5 secondes pour afficher «BT PAIRING». 2. Sur votre appareil, sélectionnez «[AV] Samsung Soundbar Q6B-Series» dans la liste qui apparaît. • Lorsque le Soundbar est connecté à l’appareil mobile, [Nom de l’appareil mobile] → «BT»...
Page 75
En cas d’échec de la connexion du périphérique • Si vous avez un Soundbar existant (par exemple, «[AV] Samsung Soundbar Q6B-Series») dans la liste des haut-parleurs de l’appareil mobile, supprimez-le. • Répétez ensuite les étapes 1 et 2. Quelle est la différence entre BT READY et BT PAIRING ? •...
Page 76
• Un appareil Bluetooth peut émettre du bruit ou devenir défaillant dans les conditions suivantes : – Lorsque le corps est en contact avec l’émetteur-récepteur de signal sur l’appareil Bluetooth ou le Soundbar. – Dans les coins ou lorsqu’il y a un obstacle à proximité, tel qu’un mur ou une cloison, où des changements électriques peuvent se produire.
Page 77
(Un appareil qui n’est pas en cours de lecture est déconnecté.) • Un seul téléviseur Samsung ou deux appareils Bluetooth peuvent être connectés en même temps. • Le Soundbar se déconnecte des appareils Bluetooth lorsqu’il reçoit une demande de connexion d’un téléviseur Samsung.
Appuyez sur le Soundbar avec votre appareil mobile pour écouter le son de l’appareil mobile au moyen du Soundbar. • Cette fonction peut ne pas être prise en charge en fonction de l’appareil mobile. • Cette fonction n’est compatible qu’avec les appareils mobiles Samsung fonctionnant sous Android 8.1 ou une version ultérieure. Application SmartThings Dessus du Soundbar TAP ...
10 INSTALLATION Composantes murales DU SUPPORT MURAL Guide de montage mural Précautions d’installation (M4 x L10) • Effectuez l’installation sur un mur vertical Vis de support uniquement. • N’installez pas le produit dans un endroit où la température ou l’humidité sont élevées. •...
Page 80
2. Alignez la Ligne Centrale du Guide de 5. Poussez une vis (non fournie) dans chaque montage mural sur le centre de votre Vis de support, puis vissez fermement téléviseur (si vous montez le Soundbar sous chaque vis dans un trou de vis de support. ce dernier), puis fixez le Guide de montage mural au mur avec du ruban adhésif.
11 INSTALLATION 7. Installez le Soundbar à l’aide des Support de fixation murale en accrochant ces derniers DU SOUNDBAR sur les Vis de support fixées au mur. DEVANT LE TÉLÉVISEUR Placez le Soundbar sur un support de téléviseur. 8. Faites glisser la Soundbar vers le bas, comme illustré...
USB du Soundbar. 5. Allumez le Soundbar, puis appuyez sur le bouton (Source) pour sélectionner la Il se peut que Samsung propose ultérieurement source USB. «UPDATE» s’affichera. Cela peut des mises à jour pour le micrologiciel du système prendre trois minutes.
Réinitialisation Dessus du Soundbar INIT OK Lorsque le Soundbar est allumé, appuyez sur les boutons (Volume) de l’unité pendant au moins 5 secondes. Le message «INIT OK» apparaît sur l’écran et le Soundbar se réinitialise. MISE EN GARDE • Tous les paramètres du Soundbar sont réinitialisés.
; Pour la connexion à eARC, la fonction eARC l’appareil sous tension. dans le menu du téléviseur devrait être ; Initialisez le produit et réessayez. activée. (Téléviseur Samsung : Accueil ( (Voir page 38.) → Menu → Paramètres ( ) → Tous les paramètres (...
Page 85
Changez la sortie audio du téléviseur interférences radio s’ils sont trop proches et réglez-la sur PCM ou sur Dolby Digital. du Soundbar (p. ex. fours à micro-ondes, (Pour un téléviseur Samsung : Accueil ( ) → routeurs sans fil, etc.). Menu → Paramètres ( ) →...
Bluetooth SIG, – As an ENERGY STAR Partner, Samsung has Inc. and any use of such marks by Samsung determined that this product or product Electronics Co., Ltd. is under license. Other models meets the ENERGY STAR guideline trademarks and trade names are those of their for energy efficiency.
15 AVIS DE LICENCES LIBRES Pour envoyer des questions concernant les sources ouvertes, communiquez avec Samsung Open Source (http://opensource.samsung.com). 16 REMARQUE IMPORTANTE CONCERNANT LE SERVICE Les chiffres et les illustrations contenus dans ce Guide d’utilisation sont fournis à titre de référence uniquement et pourraient ne pas représenter...
Dimensions (L x H x P) (184,0 x 343,0 x 295,0 mm) AMPLIFICATEUR 160W Puissance de sortie nominale REMARQUES • Samsung Electronics Co., Ltd se réserve le droit de modifier les caractéristiques sans préavis. • Le poids et les dimensions sont approximatifs. FRA - 43...
Page 89
Toutes les réparations sous garantie doivent être effectuées par un Centre de service autorisé SECA. Le nom et l’adresse du Centre de service le plus près de chez vous peut être obtenu en composant sans frais le 1- 800- SAMSUNG ou en visitant notre site web au www.samsung.ca MAIN-D’OEUVRE...