Seiko V194 Instructions Manual page 7

How to check the position of the hands
l
Check that the second hand moves at normal one-second intervals when the crown
◆
is at the normal position. When the watch is stopped or the second hand is moving
at 2-second intervals, charge the watch by exposing it to light. See "HOW TO
CHARGE AND START THE WATCH." (P.21)
CROWN Pull out to t h e second
click.
t
A
Press for 2 seconds or longer.
The STOPWATCH 1/5-second
h a n d a n d p o w e r r e s e r v e
i n d i c a t o r m o v e t o t h e
preliminary position.
The watch is now in the hand
position adjustment mode.
12
STOPWATCH 1/5-second hand
Second
click
Power reserve indicator
t
Check that the position of each hand is
at the preliminary position by referring
to the table below.
Name of hand Preliminary position
STOPWATCH 1/5-second hand 0 second position
Power reserve indicator Low level
(STOPWATCH minute hand)
◆ If any hand is not correctly positioned, adjust it by carrying out the procedure on the
following page.
◆ When all hands are correctly positioned, move on to the procedure for "Time
setting for main dial." (P.15)
• If the crown is pulled out while the stopwatch is counting, the stopwatch will be automatically
reset.
• This operation can be performed both in the POWER RESERVE DISPLAY mode and the
STOPWATCH mode.
13