Table of Contents
Advertisement
SETTING THE TIME
Minute hand
Hour hand
24-hour hand
Small second hand
1. When the stopwatch is or has been measuring, if the crown is pulled out to the
second click, the stopwatch will continue the current measurement.
2. The 24-hour hand moves correspondingly with the hour hand.
3. The moment the date changes is midnight. When setting the hour hand, make
sure to check that AM/PM is correctly set by using the 24 hour hand as an AM/PM
indicator.
4. When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired
time and then turn it back to the exact minute.
6
P u l l o u t t o s e c o n d c l i c k
CROWN
w h e n t h e s m a l l s e c o n d
hand is a t the 12 o'clo c k
position.
Turn to s e t the hour and
minute hands.
P u s h b a c k i n t o n o r m a l
position in accordance with
a time signal.
SETTING THE DATE
l Before setting the date, be sure to set the time.
Date
1. Date setting should always be carried out after the time is correctly set.
2. Manual date adjustment is required on the first day after a month that has less than
31 days: February, April, June, September and November.
3. Do not set the date during any time between 9:00 P.M. and 3:00 A.M. Date setting
during this time period may cause failure of date change on the following day.
CROWN
Pull out to first click.
t
Turn clockwise until the desired date
appears.
t
Push back in to normal position.
7
Advertisement
Table of Contents
