LogTag Recorders UTREL30-16-WIFI Product User Manual page 51

During Recording
Paused Readings
During configuration of the UTREL30-WiFi you can set the option to ignore up to 15
readings for alarm and statistics calculations after either button is pressed. The readings
are still shown on the graph and in the data listing, but they are Annabelle as paused, and
their value is ignored when determining alarm trigger conditions, minimum/maximum
values and other statistical calculations.
The Paused Readings feature is useful, for example, when you need to temporarily
remove the probe from the monitored location to inspect goods, but you do not
wish to trigger an alarm as a result of you handling the probe.
It allows the logger to acclimatize to the environment
again, before further readings are processed.
After a button press the display shows
the
ignored reading has been recorded.
The option is set in the
configuration with LogTag
number of readings after the last button press.
Paused readings are specially marked in the graph and data
listings.
How long
button. It will show longer, if the button is pressed just after the logger takes a
reading, but shorter if you press the button just before. For example, if you
configure a logging interval of 10 minutes and 2 paused readings, the time
is shown could be as short as 10 minutes, but as long as 20 minutes.
Probe is disconnected
The display shows
temperature probe is disconnected. This function is useful if the probe is permanently
mounted, but you wish to take the UTREL30-WiFi to a computer for downloading its data.
Find Quality Products Online at:
symbol. will turn off as soon as the last
PAUSED
Advanced Settings tab
®
Analyzer and is expressed in
is displayed depends on when between readings you press the
PAUSED
instead of a temperature value if the logger's remote
GlobalTestSupply
www.
UTREL30-WiFi User Guide
next to
PAUSED
during
.com
54
PAUSED
sales@GlobalTestSupply.com