Garden Gear Solar Cherub D7345 Quick Start Manual

For correct usage, read these instructions carefully and keep in a safe place for
future reference.

How the Solar Light Works:

During the day, the solar panel converts sunlight into electricity and recharges the
battery. At night, the light turns on automatically using the electricity stored during
the day. The performance of the solar light is dependent on your geographical
location, weather conditions and seasonal light availability.

Choosing an Ideal Location:

Choose an outdoor location with full, direct sunshine where the solar panel can
receive at least 6 hours of sunshine each day. Shady locations will not allow the
battery to fully charge and will reduce the hours of light at night.
Please note: The selected location should not be near a strong lighting source such
as streetlights, as the sensor inside the light may react to the light source and prevent
the solar light from working.

Usage

The solar light can be used for illuminating your garden or patio. Alternatively, you
can leave the solar light outside during the day to charge and bring it into your
home in the evening to illuminate your home.

Before First Use:

1. Turn the solar cherub upside down and press the ON/OFF button on the base
(see Fig.1).
2. Charge the cherubs for a full day in direct sunlight, and the ornament will start
working and automatically light up at night.
Please note: When you wish to save the energy the solar light has stored, simply press
the ON/OFF button again to break the current.
Fig.1
Solar Cherub
D7345