Download Print this page

Garden Gear G3919 Manual

Three-tier wooden cold frame

Advertisement

Quick Links

Three-Tier Wooden Cold Frame
General information and safety warnings
• Never overload your cold frame.
• Keep your plants watered and check on them daily.
• Do not allow children to play in or on the cold frame.
• Do not load on top of the cold frame.
• Assemble on a flat, level surface.
• Never drag the cold frame, always move by carrying equally between
two people.
• Not suitable for commercial purposes.
Care and maintenance
To prolong the life of the cold frame, periodically clean the frame and
polycarbonate panels with hot soapy water and dry thoroughly.
The wood may also require yearly wood preservative treatment.
The cold frame is designed to protect young seedlings or cover vegetables
and flowers to extend the growing season.
Find a sunny yet sheltered location in your garden to place your cold frame.
Check plants in your cold frame daily, keep your plants watered.
Ventilation is important; even in early spring heat may build up quickly in the
cold frame. Remember to open the cold frame to allow ventilation.
Remember to close the frame during the evening and overnight to protect
young and delicate plants from frosts.
If you feel the need to secure the cold frame to the ground, after-market
brackets can be purchased from local DIY stores or builders' merchants.
Standard 'L-brackets' can be attached to the sides which will then allow you
to secure to the ground (by tying, pegging or screwing).
G3919
1

Advertisement

loading

Summary of Contents for Garden Gear G3919

  • Page 1 Three-Tier Wooden Cold Frame G3919 General information and safety warnings • Never overload your cold frame. • Keep your plants watered and check on them daily. • Do not allow children to play in or on the cold frame. • Do not load on top of the cold frame.
  • Page 2 Parts list...
  • Page 3 Assembly • Carefully unpack the product and ensure that you have all the correct parts. • Assemble the cold frame on a flat, level surface. • Lay out everything that you need on a flat level surface. • We recommend that two people assemble this cold frame. •...
  • Page 4 Attach the 2 doors (D) to the hinges on sides (A & B) using 8 screws (J) Attach the hinges on the top panel (E) using 4 screws (J) to the back panel (C). Slot in the 3 shelves (H).
  • Page 5 Screw on the open/close bar (N) using 1 screw (J) onto the lid (E), then screw the wing nut (M) into the prefixed nut on the side (B). Once the unit is fully assembled, tighten all screws. Then fix on the door latch (I) into the hole on the top bar (F) using screw (K).
  • Page 6 GUARANTEE IMPORTANT Please do not return this product without first calling the Customer Service number below: 0871 911 7031* Thank you for purchasing this product, which has been made to demanding high quality standards and is guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase.