Kodak EasyShare 5500 User Manual page 37

Disconnect the phone cord from the wall jack that connects your modem to the telephone wall jack and
1
plug it into the port labeled 2-EXT on your All-in-One.
Connect the phone cord supplied with your All-in-One to your telephone wall jack and the port labeled
2
1-LINE.
Set Answering Machine Mode on your All-in-One to On.
3
If your modem software is set to automatically receive faxes to your computer, set it to Off.
4
When the phone rings, your EasyShare AiO will answer automatically after the number of rings you set in
the Rings to Answer setting. It will then send fax reception tones to the sending fax machine and receive
the fax.
Shared Voice/Fax with Modem
Connect your Kodak EasyShare AiO to the phone line as shown in the illustration if you receive both voice
calls and fax calls at the same phone number, and you also have a modem connected on this phone line.
NOTE: Since your modem shares the telephone line with your EasyShare AiO, you will not be able to use
both your computer modem and your All-in-One simultaneously. For example, while you are
sending and receiving faxes, you will not be able to Email or access the Internet.
Disconnect the phone cord from the wall jack that connects your modem to the telephone wall jack and
1
plug it into the port labeled 2-EXT on your All-in-One..
Connect a phone to the Out port on the back of your modem.
2
Connect the phone cord supplied with your EasyShare AiO to your telephone wall jack and the port
3
labeled 1-LINE.
If your modem software is set to automatically receive faxes to your computer, set it to Off.
4
User's Guide
Getting Started
33