3 Bottom touch lights—slide/tap arrows NOTE: When your hand is within where to touch. Tap a light on the right border to turn on the screen icons. To use the Quick Touch Borders, see www.kodak.com/go/support 4 Volume button 5 Mode button 6 Power button...
3 Doing more with your frame ...21 Accessing menu options... 21 Selecting multiple pictures... 23 Copying on your frame ... 24 Rotating pictures and videos ... 25 Deleting pictures and videos... 25 Playing music... 26 Creating and playing a multimedia slide show ... 28 www.kodak.com/go/support...
Page 6
6 Appendix ...42 Digital frame specifications... 42 Important safety instructions ... 43 Upgrading your software and firmware... 44 Additional care and maintenance ... 44 Replacing the battery ... 45 Limited warranty ... 47 Regulatory compliance and advisory ... 49 www.kodak.com/go/support...
Getting started Welcome to your KODAK EASYSHARE Digital Frame. Viewing and sharing your pictures couldn’t be simpler! Setting up your frame Setting up the stand Pull to adjust the frame angle for best viewing Your frame displays pictures in landscape orientation...
Your power cable may look different from the one pictured. Use the plug that accommodates your type of power outlet. The battery charges whenever the frame is connected to AC power. Leave connected for at least 3 hours for full charge. For more about charging and using battery power, see page www.kodak.com/go/support...
NOTE: Your frame may have a pre-loaded video or pictures, which start playing if you don’t have your own pictures loaded (on a memory card, USB device, or copied into internal memory). You cannot delete the preloaded video or pictures. www.kodak.com/go/support Getting started Power button - press and hold (for about...
Right border lights Right border icons Menu Play Down OK or Bottom border tap arrow lights or slide to move forward or backward thru pictures www.kodak.com/go/support move thru the menus and thumbnail rows (Select) or (Picture Finder)
Page 11
So, for example, when this guide says “Tap the up arrow Tap the light Tapping on the right border Tapping and sliding on the bottom border www.kodak.com/go/support DON’T Tap the screen Tap the light next to an icon to select it. Icons change color when they’re selected.
(Menu), then tap the down arrow 2 Tap the down arrow to highlight Time/On Off, then tap OK. Tap the light next to an up/down arrow highlight your language, then tap OK. page to highlight www.kodak.com/go/support (Settings); tap the down (Settings). Tap...
Enabled. b Tap the down arrow to highlight Turn Frame On At, then slide or tap between the left/right arrow lights to select the On time (based on a 24-hour clock). www.kodak.com/go/support 3 Set the clock. Tap the down arrow slide or tap between the left/right arrow lights to select the current time (based on a 24-hour clock).
Inserting a memory card To insert a card, push it firmly into the slot. To remove a card, pull it out of the slot. SD/SDHC (SECURE DIGITAL/SECURE DIGITAL High Capacity) MMC (MULTIMEDIA Card) MS (MEMORY STICK) MS Pro Duo (MEMORY STICK) www.kodak.com/go/support...
Connecting a computer or USB device www.kodak.com/go/support Connect to a computer USB cable included Supported USB devices include a computer, flash drive, card reader, hard drive*, etc. USB devices are sold separately. *External hard drives must be self-powered. Connect a USB device...
EASYSHARE Digital Display Software if it doesn’t open automatically. When prompted, take a few minutes to electronically register your frame and software for exclusive tips and offers. To register later, visit www.kodak.com/go/register. —manage your frame right page —organize, edit, and share your pictures.
NOTE: If your frame hasn’t been plugged in to AC power for a long time (more than a year), you may need to refresh the battery to fully charge it. See www.kodak.com/go/support Refreshing the battery, page Getting started...
NOTE: Your frame may have a pre-loaded video or pictures, which start playing if you don’t have your own pictures loaded (on a memory card, USB device, or copied into internal memory). You cannot delete the preloaded video or pictures. www.kodak.com/go/support...
USB drive—appears when you insert a USB flash or other type drive Playback information Picture display order: – When Shuffle is on (the default setting, in random order. www.kodak.com/go/support Viewing pictures and videos 1 Tap (Menu), then tap Videos). All connected sources and internal memory are listed.
Calendar—a calendar with today’s date highlighted is displayed on one side of the screen, while pictures and videos play on the other. see page 33. The default is Old to new. Changing frame settings, page Single picture or video (default) Calendar/picture Collage (4 pictures) Clock/picture (see page (see page 15). www.kodak.com/go/support 13).
(Picture Finder) to play pictures taken on the same day (Play) to resume collage play. NOTE: Videos and multimedia slide shows do not play in Collage mode. www.kodak.com/go/support Viewing pictures and videos Mode button to highlight a different picture in the collage.
Viewing pictures and videos Copying your computer’s entire picture collection Use the Sync (synchronize) feature in KODAK EASYSHARE Digital Display Software to create a collection of all the pictures and videos on your computer, and copy the collection into your frame’s internal memory.
Have the most fun with Picture Finder in Collage mode: 1 Press the Mode button to change to Collage mode 2 Tap the right border to display the icons and to pause play. 3 Tap a right/left arrow www.kodak.com/go/support Viewing pictures and videos Pictures & Videos folder and tap...
To play a video or a slide show, highlight the thumbnail and tap 1 Tap a touch border to display the icons, then tap (Menu). 2 Tap (Thumbnails). NOTE: You can also display thumbnails from the Pictures & Videos source list (see page 13). www.kodak.com/go/support (Play). (Play).
To view the next / previous picture or video, tap the bottom arrow lights. NOTE: Video formats created with digital cameras are certified for KODAK Digital Frames. Videos created with or copied from other sources may not play on your frame.
The Default Play Location icon source (see page 13). No—to exit the menu. Clear my Default Play Location—to delete reference to the currently designated picture source. (Settings). to highlight Default play location. appears in the Pictures & Videos list as a picture www.kodak.com/go/support...
Tap OK after highlighting an option Pictures & videos Slide shows Thumbnails Multi-select www.kodak.com/go/support 31.) of the borders, the lights turn on and indicate 1 - 3 in. (2.5 - 7.6 cm) 1 Tap (Menu). 2 Tap an up/down arrow option, then tap OK.
Page 28
View and play songs in the current source Customize how you use your frame and how you view your pictures and videos. See Chapter 4, Changing settings and Close the menu screen without saving any selections. (see page 26). more. www.kodak.com/go/support (see...
To select all pictures at once, tap To deselect all pictures at once, tap To quickly deselect many pictures, tap tap Deselect All. www.kodak.com/go/support Doing more with your frame 1 Tap (Menu), then tap the down arrow highlight Multi-Select. Tap OK.
8). For example, copy pictures from a memory card* into page 18) or display it in single view see page to highlight to highlight the copy-to destination, then tap OK. 31). 16) are always resized. www.kodak.com/go/support (Copy). Tap OK. → → Settings Automatic Copying...
3 Highlight Yes to confirm. 4 Tap OK to delete the picture and return to the menu. If you change your mind, highlight No, then tap OK to return to the menu. www.kodak.com/go/support Doing more with your frame page 18) or display it in single view see page (Rotate).
4 Tap (Play). Picture playback resumes, with your selected songs playing in the background. Settings menus, page to highlight to highlight a song, then tap (Menu), then tap the down arrow www.kodak.com/go/support page (Music), then tap OK. to select it.
Page 33
Exit * Shuffle play and Audio priority are also available in the www.kodak.com/go/support to highlight Music Description Tap an up/down arrow to highlight songs in the music list, then tap Menu. Tap an up/down arrow to highlight Copy or Delete, then tap OK.
Doing more with your frame Creating and playing a multimedia slide show Use KODAK EASYSHARE Digital Display Software on your computer to create a multimedia slide show with pictures and music (WINDOWS OS only). Then copy the slide show to your frame.
To change the orientation to portrait the stand 90 degrees. The picture is automatically displayed in the new orientation. 1 Turn the frame 2 Rotate the stand www.kodak.com/go/support Doing more with your frame (Play). , simply turn the frame on its side and rotate...
Hanging your frame on the wall To hang your frame on the wall, close the stand, then use wall anchoring hardware (not included) to securely mount the frame to the wall. Back View, page ii for the location of the mounting holes. www.kodak.com/go/support...
Duration Specify how long each picture is displayed. www.kodak.com/go/support (Settings). to highlight a setting, then tap OK. Options Install now—load the latest version of firmware on your frame (page 35).
Page 38
Oldest picture—start playback with the oldest picture available. On (default)—play music if available. Off—do not play music automatically. To manually start playing music, see page 1 (darkest) to 10 (lightest). Change the setting by tapping the arrow lights on the bottom Quick Touch Border. www.kodak.com/go/support...
Page 39
(smaller size). NOTE: Videos are always copied at full resolution. Fit or Fill Specify how to scale the pictures on the screen. KODAK PERFECT TOUCH Technology Automatically enhance your pictures to look their best on your frame. Display Picture Order By Specify the order in which to play your pictures—by date or...
Page 40
(default): music stops playing while the video, with audio, plays. Play music: music continues to play, video plays but its audio is muted. Choose your language (page Check your frame model, serial number, and firmware version. Return to the top menu with no actions performed or saved. www.kodak.com/go/support...
Upgrading your firmware (recommended) Firmware is the software that runs on your frame. To check for the latest version, visit www.kodak.com/go/digitalframedownloads. Download the firmware to your computer, then upgrade your frame: 1 On your computer, go to 2 Follow the screen directions to download the frame firmware to your computer.
Gently wipe the frame and screen with a clean, dry, lint-free cloth. For fingerprints on the frame, apply light pressure. Learning more about your frame www.kodak.com/go/digitalframes www.kodak.com/go/digitalframesupport Learn more about your frame. Order accessories. Interactive troubleshooting and repairs...
NOTE: Pictures may take a longer time to display when the picture/video files are large Touch border doesn’t work. IMPORTANT: www.kodak.com/go/support www.kodak.com/go/digitalframesupport Make sure the power cable that was included with your frame is connected securely (see page Unplug the power cable for 5 seconds, then reconnect the cable.
Page 44
Connect the device to your computer. Open My Computer and locate the device. Right-click on it and choose Format. From the File system drop-down menu, choose FAT32 then click Start. 11). 39). 45). (see page (see page Resetting the clock and www.kodak.com/go/support i) at...
Page 45
2 Fully discharge the battery—disconnect the power cable, start the frame and let it run until the battery is discharged (the frame turns itself off). 3 Repeat the above charge/discharge procedure 2 or 3 times. www.kodak.com/go/support Troubleshooting and support to highlight Year/Month/Day, then slide or tap between (see page 6).
The frame was unable to copy the picture. Insert a different card or device The frame was unable to copy the picture. Insert a different card or device Remove write protection, unlock card. Delete pictures from card www.kodak.com/go/support (see (page (page (see page 25).
Page 47
File Copy Failed! Internal error. Parameter is invalid. Unknown error. www.kodak.com/go/support Troubleshooting and support Try one or more of the following Turn off the frame, then turn it back on. Press and hold the power button (for about 2 seconds), then release.
MOV, AVI, MPEG-4, M-JPEG NOTE: HD (high definition) video files are not supported; they will not play on your frame. Video formats created with digital cameras are certified for KODAK Digital Frames. Videos created with or copied from other sources may not play on the frame.
If the LCD breaks, do not touch the glass or liquid. Contact Kodak customer support. The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. For approved accessories, visit www.kodak.com/go/accessories.
Remove the battery when the product is stored for an extended period of time. In the unlikely event that battery fluid leaks inside the product, contact Kodak customer support. In the unlikely event that battery fluid leaks onto your skin, wash immediately with water and contact your local health provider.
Replacing the battery To purchase a replacement battery (model KAA3HR-2300), visit www.kodak.com/go/accessories. Remove the existing battery www.kodak.com/go/support Disconnect the power cable. Place the frame screen-down on a flat, protected surface. Rotate the stand away from the battery door. Remove the screw.
Page 52
Fit the battery door tab into the slot in the frame body, then snap the door into place. Replace the screw. Charge the battery—plug in the power cord and leave connected for at least 3 hours. www.kodak.com/go/support...
If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak along with proof of the purchase price paid.
Unless a specific Kodak warranty is communicated to the purchaser in writing by a Kodak company, no warranty or liability exists beyond any minimum requirements imposed by law, even though defect, damage, or loss may be by negligence or other act.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Hereby, Eastman Kodak Company declares that this KODAK Product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 56
Use of this product in any manner that complies with the MPEG-4 visual standard is prohibited, except for use by a consumer engaging in personal and non-commercial activities. Russian GOST-R Eastman Kodak Company Rochester, New York 14650 Licensing Supply of this product does not convey a license nor imply any right to distribute...
Page 57
Appendix China RoHS www.kodak.com/go/support...
Page 58
25 display picture order by, 33 pictures and videos, 13 pictures, fit/fill, 33 disposal, recycling, 44 duration, picture display, 31 EASYSHARE Digital Display Software create slide show, 28 installing, 10 sync your collection, 16 energy saver, setting, 6 www.kodak.com/go/support...