Table of Contents
Advertisement
1
camera cable connector
3
screws (4)
6. Lift the display panel off the display back cover.
7. Turn the display panel over and place it on a clean surface.
8. Peel the tape covering the display cable and lift the display cable off the back of the display panel.
9. Lift the tape that secures the display cable to the display cable connector and disconnect the display cable.
1
back of the display panel
3
display cable connector
Replacing the Display Panel
1. Follow the instructions in
2. Connect the display cable to the display cable connector and secure it with the tape.
3. Place the display cable on the back of the display panel and secure it with the tape.
4. Turn the display panel over and place it on the display back cover.
5. Connect the camera cable to the connector on the camera module.
6. Replace the four screws that secure the display panel to the display back cover.
Great user manuals database on
2
display panel
2
display cable
4
tape
Before You
Begin.
UserManuals.info
Advertisement
Table of Contents
