Table of Contents
Advertisement
2. Replace the four screws (two on each side) that secure the display panel brackets to the display panel.
3. Connect the display cable to the display board connector and secure it with the tape.
4. Adhere the camera cable to the back of the display panel.
5. Place the display panel on the display cover and connect the camera cable to the connector on the camera module.
6. Align the screw holes on the display panel with the screw holes on the display cover.
7. Replace the eight screws that secure the display panel to the display cover.
8. Replace the display bezel (see
9. Replace the display assembly (see
CAUTION:
result in damage to the computer.
Back to Contents Page
Great user manuals database on
Replacing the Display
Replacing the Display
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
UserManuals.info
Bezel).
Assembly).
Advertisement
Table of Contents
