Table of Contents
Advertisement
1
display assembly
3
display cable
Replacing the Display Assembly
1. Follow the instructions in
2. Place the display assembly in position and replace the two screws (one on each side) that secure the display assembly to the computer base.
3. Route the display cable into the routing guide and connect the display cable to the connector on the system board.
4. Route the Mini-Card antenna cable into the routing guide and connect the Mini-Card antenna cable to the connector on the Mini-Card.
5. Turn the computer over and replace the two screws at the base of the computer.
6. Replace the palm rest (see
7. Replace the keyboard (see
8. Replace the battery (see
CAUTION:
result in damage to the computer.
Display Bezel
Removing the Display Bezel
CAUTION:
1. Follow the instructions in
2. Remove the display assembly (see
3. Using your fingertips, carefully pry up the inside edge of the display bezel.
4. Remove the display bezel.
Great user manuals database on
2
screws (2)
4
Mini-Card antenna cable
Before You
Begin.
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
Before You
Begin.
Removing the Display
UserManuals.info
Assembly).
Advertisement
Table of Contents
