Advertisement
Operation
Thermal Safety Cut-out
The built-in overheat cut-out switches off the appliance automatically in the event of a fault.
If this occurs switch off the appliance or disconnect the mains plug from the socket. After
a short cooling down phase, the appliance is ready for use again. If the fault should occur
again, see your local dealer.
Light Emitting Diode
This fire is fitted with LED (Light Emitting Diode) bulbs in place of traditional incandescent
bulbs. These generate the same light levels as traditional bulbs, but use a fraction of the
energy consumed.
Discard leaking batteries
Dispose of batteries in the proper manner according to provincial and local regulations.
Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly,
if all the batteries are not replaced at the same time, if disposed of in a fire, or if an attempt
is made to charge a battery not intended to be recharged.
9
Advertisement
