Caputer Mode - Mercury CyperPix S830D User Manual

4. Navigation Modes and Menus
4-1 Capture Mode
This mode is the first one after the camera power is on. You
can take your favorite pictures in this mode.
Operation guidance:
(1) Press and hold the Shutter button down half way to select the
photography location, and a yellow "[ ]" will appear in the center of the
LCD monitor. Select the AE, and press the Shutter button down fully and
release it to complete the recording.
(2) Using button to adjust the digital zoom. The adjustment ratio of the
digital zoom will appear on the left hand side of the LCD monitor, from 1.0
time to 4.0 times.
(3) A Quick Menu will be displayed on the LCD by pressing the MODE button
quickly. Using button, the user can complete some special
configurations which include AWB setting, resolution setting, image
quality setting and self-timer setting and so on.
(4) Set Flash light auto or off by pressing the SET button. When the flash light
is charging, the LCD will be turned off.
(5) If the user presses the SHUTTER button when the self-timer is on, the
camera will count down from 10 to 0 and then capture a picture.
(6) The green LED will be on when the Macro key on the left hand side of the
camera is toggled to Macro Mode.
(7) Press the button to jump to play back mode.
(8) Once connected to TV, the LCD power will be off automatically, and then
the images within the camera's lens will be displayed on TV screen.
(9) Press the MODE button one second the camera will jump to mode
(1) Current working mode
(2) Memory Status
(3) Number of pictures
(4) Remaining battery power
(5) Zoom lever
(6) Flash light status
13