3-4 Shutter Button
This camera is designed for 2-step shutter function. A "[ ]" mark will appear
●
in the center of the LCD monitor when the Shutter button is pressed and held
half way down. The camera will beep after the Shutter button is pressed
down fully; then release the Shutter button to take a picture.
3-5 Mode Selection
Please press and hold "
●
selection menu including "Play Mode"
"Movie Mode"
"Capture Mode"
.
。
3-6 Function Key
●
You can perform different operations in the different mode by using the
Function Key, e.g. select, go up/down and move.
3-7"SET" Button
This key is used for SELECTION/SET UP under selection menu
●
This key
is also flash button under capture mode.
" button for 2 seconds to enter mode
"Setup Mode"
"Function Selection"
11