Table of Contents
Advertisement
Available languages
Available languages
EN
3
Button or touch sensor switch (switch light strip at top on or off)
4
Button or touch sensor switch (switch light strip at bottom on or off)
Depending on the mirror cabinet model, the buttons or touch sensor switches may be the
opposite way round to those shown in the figure.
Using the power socket
The internal power socket is suitable for razors, hairdryers and similar products.
Only devices with a mains voltage that is compatible with the mains voltage of the power
socket may be used. The mains connection must be compatible with the mains plug. → See
"Technical data", page 4.
How to use the product
Switching the mirror cabinet
on and off
Prerequisite
–
The Reflect Basic and Glow mirror
cabinets only have a top light strip.
–
Depending on the mirror cabinet model,
the buttons or touch sensor switches
may be installed the opposite way
round to those shown in the figure.
1
Push the button or touch sensor
switch on the right.
✓ The top light strip switches on or
off.
6 (44)
2
Push the button or touch sensor
switch on the left.
✓ The bottom light strip switches on
or off.
Care instructions
You have selected a product with a high-
grade surface. Please follow the care
instructions below.
The manufacturer does not assume any
liability for product damage that arises as a
result of incorrect care and handling.
18014407431905803 © 03-2022
2 / 2
970.962.00.0(01)
Advertisement
Table of Contents
Need help?
Do you have a question about the IDO Reflect Clear and is the answer not in the manual?
Questions and answers