Radio Tool Installation Directory - Texas Instruments SimpleLink CC3 20 Series User Manual

www.ti.com

4 Radio Tool Installation Directory

The installation process is made straightforward by following the steps. The default installation location is C:\TI
\CC3xxx_RadioTool_<version>, but users can change it to any location they want.
Table 4-1 lists the file directory structure after installation.
Folder Name
RadioToolApplication
RadioToolApplication_Source
CC32xxBoardApplication_Binary
CC32xxBoardApplication_Source
SWRU471B – FEBRUARY 2017 – REVISED AUGUST 2020
Submit Document Feedback
Table 4-1. File Directory Structure
Contents
The Radio Tool GUI application (RadioToolGUI.exe), Radio Tool CLI application
(RadioToolCLI.exe), and three precompiled DLL files (CC31xxLibSPI.dll,
CC31xxLibUART.dll, CC32xxLib.dll)
The Radio Tool application source for development. Use Visual Studio to open the file
CC3x20_RadioTool.sln.
CC32xx MCU images. Use these images with Uniflash to flash an MCU image onto the
device. See Section 6.
CC32xx MCU image source for development. Place the radiotool folder under the CC32xx
SDK example directory, and use Code Composer Studio
CCS folder inside.
Copyright © 2020 Texas Instruments Incorporated
Radio Tool Installation Directory
™ (CCS) to open the project in the
SimpleLink™ Wi-Fi® CC3x20, CC3x3x Radio Tool User Guide 3