Advertisement
INSTALLATION
When Installing This Product...
1. Read these instructions carefully. Failure to follow
them could damage the product or cause a hazard-
ous condition.
2. Check the ratings given in the instructions and on
the product to make sure the product is suitable for
your application.
3. Installer must be a trained, experienced service
technician.
4. After installation is complete, check out product
operation as provided in these instructions.
UVL-FCU ULTRAVIOLET LAMP KITS FOR FAN COIL AND PTAC UNITS
PTAC
Front
Fig. 2. Example PTAC Installation
Fan Coil (horizontal)
Front
Fig. 3. Example Fan Coil (horizontal) Installation
Fan Coil (vertical)
Front
Fig. 4. Example Fan Coil (vertical) Installation
WARNING
Electric Shock Hazard.
Can cause electrical shock or equipment
damage.
Do not connect to power before installation is
complete.
Installation in PTACs and Fan Coils
1. Determine the best position for placement of the UV
lamp and power supply. (Fig. 2-Fig. 4)
2. Position lamp for best UV exposure and to minimize
light leakage into the room.
3. Locate lamp so it irradiates wet side of coil and/or
blower areas where fouling is present.
4. Mount lamp with magnet or self-tapping screws.
5. Apply warning/replacement lamp sticker to outside
of unit (see Sight Glass Installation).
Side
3
Side
Side
31-00403—02
Advertisement
