Cisco MDS 9124V-K9 Hardware Installation Manual page 14

LEDs
Indicator
PSU
Operation
Status LED
(faceplate of
each PSU)
Unlabeled
LED
(faceplate of
each fan
module)
The following table describes the Ethernet port LEDs for the switch.
LED
Position
Left
Right
The following table describes the Fibre Channel port LEDs for the switch.
Status
Solid Green
Regular Blinking Green
Intermittent Blinking Green
Solid Orange
Blinking Orange
Off
Cisco MDS 9124V-K9 Switch Hardware Installation Guide
8
Function Color
Amber
Operation
Status
Fan Green
Operation
Status
Amber
Status State
Off There is no link.
Solid Green Indicates a physical
link.
Solid Amber There is no link traffic.
Blinking Indicates link traffic.
Amber
Off There is no link.
Overview of Cisco MDS 9124V-K9 Switch
Status State
Off PSU is operating normally.
Solid on One of the following conditions exists in
the PSU:
Over voltage
Over current
Over temperature
Fan failure.
Blinking PSU has a fault, but is still operational.
Solid on The chassis fan module is operating
normally.
Solid on The chassis fan in the fan module has failed.
State
The link is up.
The link is up and the port beacon is active.
The link is up and traffic is flowing through the port.
The link is disabled by the software.
A fault condition exists.
No link.