Tabs Horizontal; Tabs Clear Horizontal - AGILE N-Series User Manual

P a g e 4 - 1 8

Tabs Horizontal

COMMAND: COMMAND: COMMAND:
COMMAND: COMMAND:
RANGE: RANGE: RANGE: RANGE: RANGE:
Default tab stops begin at 1.1" from the left side of
the page and are at every 0.44" thereafter.
Tabs may be entered in any order.
If more than 64 tab values are entered, the excess
tabs will be deleted, starting with the right most tab
value.
The maximum tab position is 815 (13.58").
Tabs are not effective beyond margins.
If the page orientation is changed, the tab settings
must also be changed.
Tab settings remain valid until the "Reset" or "Clear
Horizontal Tabs" commands are sent.

Tabs Clear Horizontal

COMMAND: COMMAND: COMMAND:
COMMAND: COMMAND:
RANGE: RANGE: RANGE:
RANGE: RANGE:
t# t# t# t# t# ,# ,# ,# ,# ,# ,...# ,...# ,...#
,...# ,...#
1 1 1 1 1 2 2 2 2 2 64 64 64
64 64
Margins Margins command Margins
See See See See Margins See Margins command command command command
d d d d d
N/A N/A N/A
N/A N/A
User's Manual