Xes Command Format; Two Types Of Escape Sequences; Job Control Commands - AGILE N-Series User Manual

XES COMMANDS

XES Command Format

The escape character
key)
The instruction, sometimes preceded by a plus sign
(+)
User-entered variables, if required for the command
An optional comma (,) is used to print a
Configuration/Status Page (Job Status Sheet) after a
job boundary command is detected.
An optional comment to be printed on the
Configuration/Status Page
A line end (either CR, LF, NL or CR/LF) is sometimes
required

Two Types of Escape Sequences

Job Control Commands

Non-Job Control Commands
Job Control Commands
(1Bh or a user-defined
P a g e 4 - 7