Advertisement
Quick Links
End table
Assembly Instructions - Please keep for future reference
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
If you need assistance or find missing or damaged parts
in the package, contact us by mail: info@wasagun.com
1
ZZ001
Dimensions
Width - 22.8inch
Depth -11.4inch
Height - 25.6inch
Assembly Tool
Required
Screwdriver
2
1
Advertisement
Related Manuals for WASAGUN ZZ001
Summary of Contents for WASAGUN ZZ001
- Page 1 Width - 22.8inch Depth -11.4inch Height - 25.6inch Assembly Tool Required Screwdriver Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. If you need assistance or find missing or damaged parts in the package, contact us by mail: info@wasagun.com...
- Page 2 Components If you need assistance or find missing or damaged parts in the package, contact us by mail: info@wasagun.com Please check all parts below under a good condition before you install the end table . 4 pcs 4 pcs 18 pcs...
- Page 3 Assembly Instructions Step 1 Step 2 Hx4pc Hx4pc P x2pc 1:Insert the fitting "P" into the hole corresponding to 7, 2:Insert the other end of "P" into the corresponding hole and then fix it with screw "H". of 8, and then fix it with screw "H". Step 3 Step 4 Hx2pc...
- Page 4 Assembly Instructions Step 5 Step 6 Hx2pc Nx1pc Gx2pc E x2pc Rx1pc Rx1pc L x1pc 5:Fix fitting "N" on 11 through screw "H". 6.1:Fix the assembled 11 on the 4 through screw "G". 6.2:Fix the fitting "L" on 6 through screw "E". Step 7 There are two installation methods.
- Page 5 Assembly Instructions Step 8 Step 9 B x4pc Hx2pc Qx1pc Rx1pc 8:Fix the fitting "Q" on 9 through screw "H". 9.1:Press part "B" from the back of 4 into the hole. 9.2:Press part "B" from the right side of 11 into the hole. Please take the plug out of the hole at 4.
- Page 6 Assembly Instructions Step 11 Cx6pc Mx2pc Rx1pc 11.1:The other 1 is assembled in the same way as the previous step. 11.1:The fitting "M" is fixed at the bottom of 1 by rotating. Step 12 Dx4pc Cx2pc Rx1pc 12.1:Fix drawer to 2 with screw "D". 12.1:Fasten drawer to 1 with screw "C".
- Page 7 Assembly Instructions Step 13 Cx4pc F x4pc J x4pc Rx1pc 13.1:Fix screw "F" on the two holes at the rear top of 1. 13.2:Fix screw "C" on the two holes at the top of the front of 1. 13.3:Fix screw "J" on the front inner hole of 1. Step 14 14:There are two ways to open a finished product.
- Page 8 Safety Notes and Care Avice Important – Please read these instructions fully before starting assembly Check that if you have all the Do not allow your children to stand or Assemble on a soft level surface to components andools listed on the climb on or in the drawer.
-
Page 9: Warranty
Any help or questions during use, please contact us via website www.wasagun. com, send email to info@wasagun.com, we will service you within 24 hours. We suggest to provide a warranty card, a photo or a video if there’ s broken spare part or not working machine so that we can be much more clear about your problems and offer you the best solution.
Need help?
Do you have a question about the ZZ001 and is the answer not in the manual?
Questions and answers