Safety Rules And Precautionary Measures; Warnings In This Manual; Symbols Marked On Equipment - KEM SV Series Instruction Manual

Sensor adaptor
Table of Contents

Advertisement

General Information
1.2.2.

Safety rules and precautionary measures

Following these instructions is mandatory.
a.
Modifications of the SV**-****-****-** implemented without preceding written consent from the
manufacturer, will result in the immediate termination of product liability, warranty period and
certification validity.
b.
Authorized technicians must carry out installation, use, maintenance and servicing of this equipment.
c.
Never open the housing in hazardous areas while connected to power supplying or consuming
devices. Open the housing only if all leads are free of current.
d.
If the operator detects errors or dangers, or disagrees with the safety precautions taken, then inform
the owner or principal responsible.
e.
The local labor and safety laws and regulations must be adhered to.
f.
The manufacturer accepts no responsibility whatsoever if the following safety rules, precautions
instructions and the procedures as described in this manual are not followed.
h.
Modifications or repair of the flamepath is not allowed.
1.2.3.

Warnings in this manual

WARNING!
Warnings provide very important information for the correct usage of the equipment. Not observing the warnings
may lead to danger for the equipment and to danger for health and life of the user
NOTE:
Notes provide important information for the correct usage of the equipment. If the notes are not observed, a
malfunction of the equipment is possible.
1.2.4.

Symbols marked on equipment

Attention! Refer to manual
Version: SV_M_EN_170515_E003
Protective (earth) ground
5

Advertisement

Table of Contents
loading

Table of Contents