Advertisement
Architectural Specifications
The CA-6T all-purpose two-way compact loudspeaker
system shall include a 6.5" (16.5cm) weather-resistant
K-1110-A low frequency driver and a 1" (2.54cm) K-118-
A titanium diaphragm compression driver mounted on
a molded Tractrix Horn. Signal shall be provided to the
transducers via a passive internal frequency dividing
network, with a 2kHz crossover frequency. The enclo-
sure tuning shall be dual port bass reflex.
Frequency response shall be 69Hz to 20kHz, ±4dB, with
the -10dB down point at 53Hz, measured at 1 meter,
half space anechoic. The dispersion angle shall be 90º x
60º nominal (refer to graph). Sensitivity shall be 95dB
SPL, measured at 1 meter, half space anechoic, with a
2.83V input. Power handling shall be 85 Watts (19V), to
AES standards, continuous pink noise, 50Hz to 10kHz,
6dB peaks. Calculated maximum continuous output at
1 meter shall be 111dB SPL.
Safety Point
Back View
Back View Without Bracket
©2001 Klipsch Audio Technologies. All rights reserved.
Specifications subject to engineering changes.
UNC
1/4-20
Threaded Hole
1/4-20
5.915
UNC Stud
1/4-20
Left Side View
3502 Woodview Trace, Suite 200 • Indianapolis, IN 46268
137 County Road 278 • Hope, AR USA71801
1-888-600-5776 • www.klipsch.com
Nominal impedance shall be 8 ohms, with a 4.1 ohm
minimum at 180Hz. Full-range connections shall be
made via 5-way binding posts.
A removable powder-coated aluminum grille shall be
provided for protection of the transducers from tamper-
ing or damage. The enclosure shall be of UV- and
weather-resistant ABS plastic, available in black or
white, with dimensions of 9.5" (24.13cm) high by
15.125" (38.42cm) wide by 10.375" (26.35cm) deep. Net
weight shall be 15 lbs. (6.81kg). Mounting shall be via
protruding stainless steel threaded studs on the side
enclosure panels, mating to large external knobs for
positive attachment to the C-shaped mounting bracket
(included).
The system shall be a Klipsch CA-6T loudspeaker.
3.000
9.500
Top View
UNC Stud
UNC Stud
1/4-20
Front View
Bottom View
5.915
UNC Stud
1/4-20
Right Side View
1M0901
195063
Advertisement
