Advertisement
Getting Started MAG6/MAG8
Locator Attributes
Power key: Press and hold to turn on or off
or tap to turn back light on or off
UP key: Move to previous cursor selection
Down key: Move to next cursor selection
Confirm key: Tap to confirm cursor selection.
Press and hold to enter secondary page
Setup key: Tap to enter calibration
page/return to main page; Press and hold to
enter setup page
Menu functions
Reference Booklet - Locator
Transmitter Clock Position
www.undergroundmagnetics.co.in
Transmitter model, operating
frequency and mode
Transmitter temperature (Flashing
indicates transmitter temperature is
rising)
Depth/Slant distance between
transmitter and receiver
Signal to Noise Ratio
Transmitter signal strength
Transmitter pitch
Transmitter battery status
Estimated horizontal distance
between transmitter and receiver
Estimated transmitter depth
Vertical distance between receiver
and transmitter
B1: Transmitter activation
B2: Transmitter pairing
B3: Receiver settings with Transmitter
B4: Telemetry channel selection for receiver
B5: Receiver and display pairing
B6: Roll calibration/offset
B7: Pitch unit selection- Degree/Percentage
B8: Time & Date setting
B9: System lock/unlock
B10: Brightness control
B13: Depth unit selection- Feet/Meter
B16: Speed control of the ball
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Underground Magnetics MAG6
Summary of Contents for Underground Magnetics MAG6
- Page 1 Getting Started MAG6/MAG8 Reference Booklet - Locator Locator Attributes Power key: Press and hold to turn on or off or tap to turn back light on or off UP key: Move to previous cursor selection Down key: Move to next cursor selection Confirm key: Tap to confirm cursor selection.
- Page 2 Warning: Transmitter Activation to be completed within 10 minutes after batteries have been placed in the transmitter. Transmitter Activation 2.Tap to reach B1 icon for transmitter activation. 1.Press and hold to enter setup page. 4. 1040-00601 is the transmitter identification 3.Tap to enter B1 page.
- Page 3 Note: For best results pair the transmitter in all ten frequencies by repeating the steps in transmitter setting before proceeding to depth forecast Transmitter Selection 1.Press and hold to enter setup page. 2.Tap to reach B3 icon. 3.Tap to enter receiver setting page. Tap to reach transmitter model.
- Page 4 3. Tap to enter transmitter settings page. The receiver and Echo transmitter will automatically pair. Then tap to select its frequency, power mode and wake up mode. Warning: Transmitter should not contain battery while using Depth forecast Depth Forecast 2.Tap to enter depth prediction page.
- Page 5 Warning: Even if the transmitter’s roll, pitch, battery status and temperature are displayed correctly, calibration may not be reliable due to a distorted magnetic field. Depth Calibration 3m/10m/20m should be measured from the centre 1. Ensure that the transmitter is working properly the housing to centre of the by verifying the data on receiver and place the Locator.
- Page 6 System Unlock 1.Press and hold to enter setup page. 2.Tap to reach B9 icon. 4.Tap to return to main page. 3.Tap to enter system unlock page. to input password. Note: To get the password please contact your dealer. 501 & 506, 5 Floor, The Pinnacle Business Tower, Shooting Range Road, Surajkund, Faridabad, Haryana, India –...
Need help?
Do you have a question about the MAG6 and is the answer not in the manual?
Questions and answers