A locating system designed to assist horizontal directional drill machine operators in locating and tracking underground drill head locations and orientations (53 pages)
Page 2
Contents of MAG series Contents of MAG series Contents of MAG series Contents of MAG series Caution………………………………………………………………………………………. 3 Producthighlights………………………………………………………………………………4 Transmitter………………………………………………………………………………….. 5 Battery and charger…………………………………………………………………. FCC Statement……………………………………………………………………………... Warranty…………………………………………………………………………………...
Page 3
This locating system is only a tool to assist the operator to locate the drill head. It is the operator not the Mag series locating system that is responsible for identifying the drill head location. Underground Magnetics is not responsible for any loss caused by using the Mag series. Users should operate the Mag according to the manual.
Page 4
2 Product highlights 1. High precision and high anti-interference Faraday shield 3D antenna structure 2. Industrial gold-plated industrial rated electronic modules 3. High-performance DSP 4. 2 in 1 locating system, functioning as two locators independently tracking to provide better accuracy and reliability 5.
Page 5
3.Transmitter 3.1 Introduction The transmitter provides drill head temperature, clock position, pitch, battery status and locating signal. The transmitter transmits signals at 4KHz, 19KHz or 30KHz. The transmitter will enter a “sleep” mode after 15 minutes without rotation. It takes about 10 seconds to “wake up” when the transmitter is rotated.
Page 6
3.4 Transmitter Maintenance Do not place the transmitter near excessive temperature(over 85℃). Do not apply excessive pressure, shock or vibration on the transmitter. Take the battery out of the transmitter after use. Clean the spring and cap on the battery compartment when necessary. Regularly check the sealing ring on the battery cover.
Page 7
—Consult the dealer or an experienced radio/TV technician for help. 6.Warranty Underground Magnetics offers standard warranty on parts and labor of the Mag series locating system under normal usage. The warranty period is one year for the receiver and display and six months for the transmitter.
Need help?
Do you have a question about the MAG Series and is the answer not in the manual?
Questions and answers