Preparing For First-Time Use; Install "Polaris Connect" App; Install Usb Driver; Check S100 Receives Satellite Signal - Polaris S100 User Manual

3 Preparing for First-Time Use

A tutorial video showing the process of setting up S100 to perform RTK surveying with Mobile
Topographer from very beginning can be found here
https://www.youtube.com/watch?v=6FXFHmiqboE

3-1 Install "Polaris Connect" App

Install Android app "Polaris Connect for S100 RTK Receiver" from Google Play. It can be found with this
QR Code.

3-2 Install USB Driver

USB driver needs to be installed before updating S100 Receiver firmware. Download it from:
https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers

3-3 Check S100 Receives Satellite Signal

Below steps bring up S100 as a normal USB-interface GNSS receiver to receive satellite signal:
1. Place S100 at a location having good sky view. Connect S100 with PC using the included USB cable.
.
2. Pair phone with the S100, which has a Bluetooth device name starting with "S100". See Figure 3-1
Figure 3-1
7