Advertisement
Parts Definition/ Bracket Adjustment
■ Parts Definition
Side cover(PC)
Bracket(PC)
■ Bracket Adjustment
• Mounting brackets are removable with special sliding structure that allows easy adjustment of distance between the two mounting brackets.
▪ Number of mounting brackets per unit varies depending on product length.
Installation/ Mounting Hole Specifications
■ Installation
First, machine taps or holes on the mounting surface ① .
•
• The mounting hole of this product is 4.5mm in diameter(long hole).
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product,
and tighten the nut from the opposite side of the mounting surface.
• Install flat washer and spring washer when fastening bolt and nut.
• To secure the product to brackets, place the products to brackets and push it lightly until
it makes "clark" sound.
■ Mounting Hole Specifications
Machine holes on the mounting surface referring to the diagram below.
•
A
MODEL
QCML/ QCMLC-200
45~217
QCML/ QCMLC-300
45~317
QCML/ QCMLC-400
45~417
QCML/ QCMLC-500
45~517
QCML/ QCMLC-600
45~617
QCML/ QCMLC-200/ 300/ 400/ 500/ 600
A
MODEL
QCML/ QCMLC-1200
45~1217
QCML/ QCMLC-1500
45~1517
QCML/ QCMLC-1200/ 1500
QCML/ QCMLC
Lens(PC)
①
2-Ø4.5 HOLES
4-Ø4.5 HOLES
3
Side cover(PC)
3-Ø4.5 HOLES
QCML/ QCMLC-900
Advertisement
