General Information On Damage To Property And Damage To Product - Bosch Rexroth CytroPac Operating Instructions Manual

General information on damage to property and damage to product | CytroPac
3 General information on damage to
property and damage to product
The warranty only applies to the delivered configuration. The claim to warranty
expires if the product is assembled, commissioned and operated incorrectly,
not used as intended and/or handled improperly.
Danger due to improper handling!
Damage to property!
▶ You may only use the hydraulic power unit according to chapter 2.2 "Intended
use".
▶ Do not expose the hydraulic power unit to any mechanical loads under any
circumstances.
▶ Do not place/put any objects on top of the hydraulic power unit.
▶ Never use the hydraulic power unit as a handle or step.
▶ Do not apply any external loads on the hydraulic power unit.
Unauthorized changes to the frequency converter parameters!
Damage to property!
▶ Only change parameters in accordance with the commissioning instructions
51055-IB, see chapter 1.2 "Required and amending documentation".
▶ Coordinate the any changes of other parameters with the Bosch Rexroth
customer service.
Operation with insufficient hydraulic fluid!
Damage to property!
▶ When commissioning or re-commissioning the machine/system, the oil tank
as well as the suction and working lines of the hydraulic power unit and
the components must be filled and remain filled with hydraulic fluid during
operation according to manufacturer's specifications.
▶ Observe the machine/system manufacturer's specifications regarding the point
"Control of the hydraulic fluid" and the prescribed remedial measures for the
control result.
Leaking or spilled hydraulic fluid!
Environmental pollution and contamination of the ground water!
▶ Use an oil binding agent in order to bind the leaked hydraulic fluid.
▶ When filling and draining the hydraulic fluid, always put a drip pan under the
hydraulic power unit.
▶ Observe the information in the safety data sheet of the hydraulic fluid and
the machine/system manufacturer's regulations.
NOTICE
RE 51055-B, Edition 07.2022, Bosch Rexroth AG
15/80