Table of Contents
Advertisement
Hydraulic power unit has hot surfaces!
Risk of injury! Risk of burning!
▶ Allow the hydraulic power unit to cool down sufficiently before touching it.
▶ Wear heat-resistant gloves or protective clothing. During or after the operation,
temperatures may rise to values higher than 60 °C, depending on the
operating conditions.
▶ Observe the protective measures of the machine/system manufacturer and/or
operator.
Leaked hydraulic fluid, oily surfaces!
Risk of injury! Slip hazard!
▶ Protect and mark the danger zone.
▶ Immediately remove hydraulic fluid that has leaked out.
▶ Use an oil binding agent in order to bind the leaked hydraulic fluid.
▶ Remove and dispose of the contaminated oil binding agent,
see chapter 13 "Disposal".
▶ Wear the personal protective equipment prescribed for your activity.
▶ Perform a leak test.
Contact with hydraulic fluid!
Health hazard/impairment of health, e.g. eye injuries, skin lesions,
intoxication upon inhalation or due to swallowing, sensitization!
▶ Avoid contact with hydraulic fluids.
▶ When dealing with hydraulic fluids, you must imperatively observe the
safety instructions of the hydraulic fluid manufacturer.
▶ Use your personal protective equipment (like e.g. safety goggles,
protective gloves, suitable working clothes, safety shoes).
▶ If nevertheless hydraulic fluid comes into contact with the eyes or gets into
the bloodstream or is swallowed, please consult a doctor immediately.
Electro-magnetic/magnetic fields!
Health hazard for persons with cardiac pacemakers, metal implants or hearing aids!
▶ Make sure that the personnel specified above is prevented from accessing areas
where drive components are installed and operated or arrange consultation with
a doctor for approval.
Sharp edges!
Risk of injury!
▶ Wear your personal protective equipment.
Safety instructions | CytroPac
CAUTION
RE 51055-B, Edition 07.2022, Bosch Rexroth AG
13/80
Advertisement
Table of Contents
