Table of Contents Page Description Page Number Safety Precautions Product Overview Odyssey Dimensions Odyssey – Description of Parts Odyssey - Functions Function Description Maintenance and Cleaning Seat and Cover Removal Remote Control Pairing Troubleshooting Technical Specifications Warranty User Information...
Safety Precautions Read all instructions before use. Save these instructions for future reference. Warning May result in death or injury Caution May result in death or injury Warning 1. Do not use a damaged power plug or loose electrical outlet 2.
Page 5
Safety Precautions 13. Do not place an electric heater near the product or dispose of any burning materials such as cigarettes in the toilet. This may result in fire or product deformation. 14. Do not place any containers filled with water, medicines, food, metallic objects or flammable materials on top of the product.
Safety Precautions 27. For children and seniors who have difficulties with adjusting temperature, those with sensitive skin or impaired heat sensitivity, set the temperature of the wash spray, air dryer and seat to `'low'' or `'off'' to prevent burning. 28. Close supervision is necessary when this product is used by children or persons requiring general assistance.
Page 7
Safety Precautions 40. Do not connect the mains water to the hot water pipe (only connect to cold water supply) 41. After the installation, make sure to check all water supply connections for leaks. Rubber washers should be in place for the water connection hoses and T valves. 42.
Odyssey Remote Control 1.Before using, the remote, it requires 2 batteries (type 1.5V LR3/AAA) 2. The following remote-control operation is only for the Odyssey Model with this remote control Note : The above illustration is an example only, your version may vary...
Odyssey – Functions Rear Wash and Front Wash Functions When seated and pressing the "Wash" button on the remote control or on the Side Control then it will start to wash using the Rear Function. It will operate for 3 minutes.
Page 11
The middle button of the side control will select the ‘drying’ function. It will stop drying after 3 minutes. ‘Stop’ All Operations During any operation or function the Washloo is carrying out, by depressing the ‘Stop’ button on the remote control or the central ‘Stop’ button on the Side Control, this will stop all operations with immediate effect.
Odyssey – Description Functions Adjustable Nozzle Position During the operation of the Rear or Female wash function, by pressing the ‘Rear Wash’ or ‘Female Wash,’ by Pressing the ‘Adjust Position’ button on the remote control and then select the ‘Decrease’ or ‘Increase’...
Page 13
Odyssey – Description Functions Deodorization Mode The Washloo will automatically operate the ‘Smart mode’ for the deodorization by default . It will automatically turn on once the user sits down and it will operate for one minute after the user leaves.
Page 14
BEEP. To turn it back on again repeat this process. User Settings Saving the User settings once the Washloo has been used, can be done in the following Process; Press and hold either ‘User 1’ or ‘User 2’ button on the remote control for more than 3 seconds to save the settings to ‘User 1’...
*PLEASE NOTE - If the Washloo is not used for more than 72 hours, when the next user operates the wash function, it will open the ‘self-cleaning’ for about 3 minutes. All operations will be invalid during this time until the ‘self-cleaning’ function is completed.
Page 16
‘Hard Water’ which produces large amounts of Limescale build-up. The In-Line Filter will therefore need to be checked and replaced more regularly in order to protect the Washloo’s internals from Limescale damage. The filter should be replaced when a noticeable drop in inlet pressure happens.
When installing several Washloo Bidets in Close Proximity, each remote control will be required to control each specific Washloo. To complete the individual pairing of the Washloo and remote controls is as follows; Open both the cover and seat, without any users sitting, set the night light to the “OFF"...
Trouble Shooting 1. The power supply may not be on The washing function 4. Seat sensor may not be occupied does not work 1. The water flow rate may be set to low Clean nozzle with a small brush Please increase the water temperature as per operating 1.
Technical Specifications Product Specification Voltage AC220-240V 50/60HZ Water Supply Direct connection to water pipe Water Pressure 0.7-7.5Mpa (0.7-7.5Bar) Water Pressure Adjustable in 5 levels (Level 3 is default) Temperature control (5 Levels, room temperature 31°C/33°C/36°C /39°C Adjustable) Inlet water temp to be minimum 15°C ±...
Warranty This electronic bidet has been designed and manufactured with great care and attention to detail. We offer a 24 month warranty. In the following cases the warranty does not apply; 1. Damage or loss sustained in fire, earth quake, flood, thunder or other acts of providence, pollution, gas damage, salt damage and abnormal voltage.
Important User Manual Information If you want to dispose of this product, do not mix with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Only discard discharged batteries.