Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for washloo Side Control
Summary of Contents for washloo Side Control
- Page 1 Side Control User Manual Clean Comfort Hygiene...
-
Page 3: Table Of Contents
Table of Contents Page Description Page Number Safety Precautions Product Overview Installation Guide Preparation Before Use Operation Maintenance Trouble Shooting Technical Specifications Warranty User Information... -
Page 4: Safety Precautions
Save these instructions for future reference. ‘Do Not’ fully submerge the ‘Do Not’ Disassemble, attempt Washloo into water. to repair or alter the Washloo. ‘Do not’ use the product in locations Any alterations should be carried out exposed to excessive moisture and... - Page 5 ‘Do Not’ dispose of any burning materials on top of the Washloo. If materials such as cigarettes in the foreign objects enter the product, toilet. This may result in fire or product this may result in electric shock or deformation.
-
Page 6: Product Overview
Product Overview - Side Control Models Deodorising box (inside) Side Control Panel Body Sensor Fitting Kit – All Models Plastic Water Pipe Mounting Bolts Rubber Expansion Sleeves O-Ring Spanner Steel Adjustment Brackets Seal One way T- Valve with 2x Internal Filters... -
Page 7: Installation Guide
Installation Guide Installation Environment 1. Prior to installation, ensure the area for the Washloo is clear and the correct model has been selected for your pan (please see online fitting/measuring guide). 2. Washloos’ requires water pressure between 0.06Mpa (flow)- 0.75Mpa (Static). - Page 8 Brackets into the Fixing Bracket as shown. Rubber Expansion 4. Install the Mounting bolts and Sleeves tighten down to ensure the ‘Fixing Bracket’ is in the correct position. *The Fixing Bracket can be adjusted between 130-170mm to allow adjustment of the Washloo.
- Page 9 Installation Guide Installation of Washloo Seat Installing the Washloo Seat 1. Place the Washloo in front of the Fixing Cistern Fixing Bracket. Using the release button on the Bracket lower righthand side allow the locating Release chamfer on the unit to slide backwards button onto the fixing bracket.
- Page 10 1. Insert the electric plug into the designated socket/fused spur as recommended by a qualified electrician. 2. When switched on – all lights on the unit will be illuminated. The Washloo will now prime the water system for around 10 seconds and finally the nozzle will extend out whilst performing a cleaning/first use test function.
-
Page 11: Preparation Before Use
Preparations Before Use Control Panel The following pages will describe the operation and functions of the Washloo Side Controls. Note : The above illustration is an example only, your version may vary... - Page 12 Side Control - Operation Power Switch On or Off here. Indicator light shows. Note; Normally Leave On Nozzle Position Adjust nozzle position using forward or backwards button Rear Wash / Oscillating according to your preference When you are seated and press...
-
Page 13: Operation
Side Control - Operation Night Light Press this button to turn on the Night Light. Press again to turn off. Dryer Press this button to use the warm air drying function (when the dryer is in operation the deodorization function will be turned off). - Page 14 Side Control - Operation Water Temp Water Temp Press `Water Temp' button to Deodoriser Press `Water Temp' button to adjust adjust the water temperature to Press this button and the water temperature to desired desired level. There are 4 the deodoriser will level.
-
Page 15: Maintenance
Maintenance Cleaning and Maintenance; Nozzle Cleaning. 1. Press the nozzle cleaning button and the Washloo will spray the water over the nozzle. 2. Press the nozzle cleaning button a second time and the rear nozzle will extend out, pressing again will extend the ‘feminine nozzle’. -
Page 16: Trouble Shooting
Product shuts off during handbook for auto timings) the time. 2. Power failure. 2. Check power to the Washloo. 1. Remove, clean and reinstall mesh 1. Clogged Mesh Filter filter (as per guidelines). 2. Water supply valve not opened fully. -
Page 17: Technical Specifications
Safety Device temperature fuse, earth leakage protection, water and electricity isolation system. Deodoriser Chemical absorption by deodoriser cartridge. IP Rating IPX4 Weight 5.4kg Size 510mm 380mm 150mm Remote Control 510mm 445mm 150mm Side Control Colour White Certificate CE RoHS SAA... -
Page 18: Warranty
Warranty This electronic bidet has been designed and manufactured with great care and attention to detail. We offer a 24 month warranty. In the following cases the warranty does not apply; 1.Damage or loss sustained in fire, earth quake, flood, thunder or other acts of providence, pollution, gas damage, salt damage and abnormal voltage. -
Page 19: User Information
Important User Manual Information If you want to dispose of this product, do not mix with general household waste. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Only discard discharged batteries. - Page 21 Modern Life, Smart Choice...