Related Manuals for MetLogix M2
Summary of Contents for MetLogix M2
- Page 1 Quick Start Guide Metlogix Incorporated 33 South Commercial Street Manchester, NH 03101 USA August 2011 PN# 15005-00 Copyright © 2011 MetLogix Inc. All rights reserved. Information within this document is subject to change without notice.
- Page 2 “Home” Button: Resets the large viewport to the currently defined “home” view. The M2 vertical layout contains two (2) main viewports, one on the Data/Report View Button: Displays the data/report view in the upper portion of the screen and one at the bottom. The upper viewport large viewport.
- Page 3 The M2 Quick Start Guide “Using the Manual optical edge probe” Example Help Button: Launches a PDF viewer, displaying the M2 User’s The Manual optical edge probe requires that edge crossings be Manual. confirmed by keypress. The point acquired at the last edge crossing...
- Page 4 All supported feature types can be measured explicitly using the same procedure described above. The use of the Manual and Auto Optical Edge probes requires that a valid optical edge teach routine be performed in the M2 software. “Teaching Optical Edge” Example Points requirements for probed and constructed ■...
- Page 5 Construct Feature: “X/Y Position Tolerance” Example “Construct Line” Example The M2 software supports applying an XY positional tolerance to a The M2 Software supports Tangent Line Constructions and can be circle feature and can be accomplished by using the following...
- Page 6 The M2 Quick Start Guide Tolerance Symbols: Datum Features: Datuming in the M2 software is accomplished using any of a variety of alignment operations. These operations may be used individually or in combination, and will be based upon the capability of the measuring...
- Page 7 “Right” to include the system date and time in the desired location of ■ While in Report View, press the “Print Report” button found in the M2 the report header. Set this field to “No” to omit the date and time from System Menu and confirm print settings from the displayed Windows the report header.
- Page 8 The M2 Software supports playing back part programs using the adequate privileges). following procedure: ■ Press the play button in the M2 System Menu to execute program playback. In the event the program is newly created (not from a previously saved file) a default program file name will automatically be assigned and the ■...
- Page 9 ■ Press the “User Message” edit command found in the bottom ■ If desired, save the program file using the “Save” button from the M2 toolbar. System Menu . “Appending Program Steps” Example ■...
Need help?
Do you have a question about the M2 and is the answer not in the manual?
Questions and answers