Ipod Messages; Xm Radio Messages - Pioneer Elite VSX-81TXV-S Operating Instructions Manual

Additional information
12

iPod messages

Symptom
Error I1
Error I2
No Track

XM radio messages

Symptom
Check Antenna
XM ANT ERR
Updating
No Signal
Loading
Off Air
CH– – –
– – – – – – – –
Note
• If the unit does not operate normally due to external effects such as static electricity disconnect the power plug
from the outlet and insert again to return to normal operating conditions.
76
En
Cause
There is a problem with the signal path from the
iPod to the receiver.
The software version being used with the iPod
needs to be updated.
There are no playable songs currently stored in
the iPod.
Cause
The XM antenna is not connected.
A short-circuit occurring in the antenna or
surrounding antenna cable.
The radio is being updated with the latest
encryption code.
The XM signal is too weak at the current location. n/a
The receiver is acquiring audio or program
information.
The channel currently selected has stopped
broadcasting.
You have selected a channel that does not exist,
or that you have not subscribed to.
There is no artist name/feature, song/program
title, or channel category associated with the
channel at this time.
Action
Switch off the receiver and reconnect the iPod to the receiver.
If this doesn't seem to work, try resetting your iPod.
Update the software being used with the iPod (software
versions prior to iPod update 2004-10-20 are not supported).
Input some music files compatible with iPod playback.
Action
Check that the XM antenna cable is attached securely.
Make sure that there is nothing unusual with the antenna or
antenna cable. Switch the power off then back on again.
Wait until the encryption code has been updated. Channels
00 and 01 should function normally.
Wait until the information has been received.
Select another channel.
The receiver will automatically switch to channel 001 (or the
last selected channel).
No action needed.