Advertisement
Controller including:
1. Joystick
2. Button panel
3. Charging interface
4. Power cord connector
5. Motor cable connector
Joystick
Joystick controls the direction and speed of the wheelchair. When pushing it, wheelchair will run. The greater
the pushing range of the joystick, the greater the speed of the wheelchair. When releasing it and putting it back in
place, the wheelchair will slow down until it stops running.
Warning! If your wheelchair moves unexpectedly, please release the joystick immediately, the wheelchair
will stop by itself.
On/Off button
On/Off button is used to turn on or off the controller.
Warning! Unless it is emergency, do not use on/off button to stop the wheelchair, it will cause the wheelchair
to stop suddenly.
Warning! When your wheelchair is stationary, please turn off the power to prevent accidental movement of
11
Advertisement
