Table of Contents
Advertisement
7
Troubleshooting
Automatic start-up of the system
Serious or fatal injuries due to unintentional start-up of the system.
−
Switch off the system before starting work and secure it against being
switched on again.
−
Follow safe procedures to prevent unintentional restart.
Flying objects
Objects left on or in the conveyor can fly around uncontrollably when the conveyor is
switched on and can hit and injure persons.
−
Before switching on the conveyor, remove all foreign objects such as tools,
devices, etc. from the belt!
The cleaners are used for different bulk materials and demanding working and
environmental conditions.
Errors and malfunctions can therefore occur in addition to those listed below. Please
contact the manufacturer in such cases.
DANGER
WARNING
NOTE
M4082E ZA 2022-07 CSP1 S
36
Advertisement
Table of Contents
