Advertisement
ProVent
200, series 39 310 70 550
®
2.
Safety
2.1
Warning instructions and symbols
All instructions in the operating man-
ual that affect safety are marked with
this symbol. Ignoring the symbol may
endanger personnel.
All instructions marked with this sym-
bol must be observed closely in order
to avoid damage to or the destruction
of unit components.
This symbol indicates that special
attention must be paid to these instruc-
tions in order to ensure trouble-free,
economical operation.
2.2
Intended use
The ProVent
was constructed using state-of-
®
the-art technology in accordance with recog-
nised safety specifications. However, the
functional safety of downstream assemblies
may be affected if:
– the ProVent
is used incorrectly or for a
®
purpose for which it was not intended,
– the operating conditions change,
– conversions are carried out without consul-
tation with the manufacturer,
– necessary maintenance and repair work is
not performed.
Use the ProVent
only if in perfect condition
®
and in accordance with the respective techni-
cal specifications, observing correct proce-
dures regarding safety and danger, and in
compliance with the operating instructions.
Rectify immediately (or have rectified) all
faults, especially if they affect safety.
MANN+HUMMEL Industrial Filters
Intended use also includes observing operat-
ing instructions and complying with inspection
and maintenance requirements.
The filter manufacturer is not liable for dan-
gers caused by the product being filtered.
This applies in particular for the processing
of hazardous materials. The operator of the
ProVent
is responsible for providing the nec-
®
essary, specified safety equipment.
2.3
Operational safety
All modes of operation that may affect
operational safety of the ProVent
avoided.
Independent conversions or modifications to
the ProVent
are not permitted under any cir-
®
cumstances. Furthermore, the manufactur-
er's warranty would imme-diately become
invalid.
All labelling and identification marks on the
ProVent
must be legible at all times.
®
3.
Description
The ProVent
is a crankcase ventilation sys-
®
tem and essentially consists of a housing with
an integral pressure control valve, a cover
with a bypass valve, an oil separator and a
support.
The ProVent
can be used as an open sys-
®
tem (oil seperation only) or as a closed crank-
case ventilation system (recirculation of the
blow-by gases and regulation of the crank-
case pressure as well).
The environmental regulations of each
country must be followed!
must be
®
3
Advertisement
