Honda CRF250F Owner's Manual Installation And Operation page 140

Front Brake Lever:
Never use adjusters other than those
designed for this motorcycle. Install a new
adjuster from the lever side with the lock
nut under the head of the adjuster.
1. Pull back the rubber dust cover (1).
2. Loosen the lock nut (2).
3. To position the front brake lever (3)
farther away from the handgrip, turn the
adjuster (4) clockwise.
To position the front brake lever closer
to the handgrip, turn the adjuster
counterclockwise.
4. Tighten the lock nut. Return the dust
cover to its normal position.
5. Apply the brake, release it, then spin the
wheel and check that it rotates freely.
Repeat this procedure several times.
(1)
(2) (4)
(1) Rubber dust cover
(2) Lock nut
Other Checks:
Make sure there are no fluid leaks. Check
for deterioration or cracks in the hoses and
fittings.
(3)
(3) Front brake lever
(4) Adjuster
15